Advertisement
4.
HOSE CLAMPING SYSTEM
4.1.
To clamp the hose whilst in an extended position, turn the recoil control (fig.3.A) anticlockwise.
An intermittent ‘knock’ will be noticed as the hose is pulled off the reel. When the tension is let
off the hose it will retract slightly and then lock.
4.2.
To release the hose and allow it to automatically rewind, pull the hose out from the locked position
and then release.
4.3.
To release the ratchet so that the hose remains in constant tension, turn the recoil control (fig.3.A)
clockwise. If the control will not turn under finger pressure, pull the hose out a few inches to
‘unload’ the mechanism.
WARNING! The reel tension is factory set and the control (fig.3.B) is sealed with four screws.
DO NOT remove these screws. If any adjustment is required contact an authorised service agent.
p
5.
MAINTENANCE & STORAGE
WARNING! Before attempting maintenance or inspection vent any pressure remaining in the hoses.
To ensure reliable operation, clean the hoses and casing regularly. DO NOT spray or wet the product, but clean with a cloth and
p
warm water. DO NOT use solvents or detergents, as these may permanently damage the item.
WARNING! DO NOT attempt to loosen, or remove, any casing screws.
Replacement of the hoses should be carried out by skilled personnel only, consult your nearest authorised service agent.
p
5.1.
Seals
All O-ring seals should be replaced, by an authorised service agent, annually, to ensure reel remains gas tight.
5.2.
Storage
Should you wish to store the hose reel, ensure it is clean and dry. Place in a dark, safe, dry, childproof location, where the temperature
will remain reasonably stable. DO NOT store in a nylon, or plastic, bag as this will encourage condensation.
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this equipment.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
Sole UK Distributor,
Sealey Group,
Bury St. Edmunds, Suffolk.
01284 703534
fig. 3
E-mail: sales@sealey.co.uk
RGH15 - 0166 - (1) - 240700
Advertisement
