Table of Contents
Advertisement
5.5.
Replacing the temperature limiter.
1
Remove the base.
• Disassemble the base by referring to Step (1) as shown in 5.1.
2
Separate the temperature limiter from the switch assembly.
• Gently bend the sheet connected to the switch assembly as shown
in the diagram, and fold it into the slot shape at the connection of the
switch assembly.
• Separate the Temperature limiter from the connecting rod slot.
3
Remove the Temperature limiter
• Straighten the claws (3), as shown in the diagram right and take out
the temperature limiter.
Note
• Do not deform the supporting spring when disassembly.
4
About assembly
• Conduct assembly after temperature limiter replacement as per the disassembly steps in a reversed way.
Note:
• Do not scratch the surface of the temperature limiter when assembly.
• Do not make the supporting spring tilting and deformed when assembly.
13
Advertisement
Table of Contents
