Page 1
User Manual HDMI Audio Splitter/De-embedder 1x2 All Rights Reserved Version: HDMI Audio Splitter 2013V1.3...
Page 2
HDMI Audio Splitter/De-embedder 1x2 NOTICE: Please read this user manual carefully before using this product. This manual is for operation instruction only, not for any maintenance usage. The functions described in this version are updated till July 2013. Any changes of functions and parameters since then will be informed separately.
HDMI Audio Splitter/De-embedder 1x2 1. Introduction 1.1. Introduction to the HDMI Audio Splitter The HDMI Audio splitter is a high-quality HDMI audio splitter/de-embedder, with 1 HDMI and 1 split stereo audio output, HDCP compliant and HDTV compatible. The antistatic case design of the HDMI Audio splitter provides good protection for stable performance, and its transmission resolution ups to 1920*1200@60Hz.
HDMI Audio Splitter/De-embedder 1x2 HDMI IN: HDMI input port, used to connect to an HD video source device, such as a ① DVD player, a computer etc. 5V: Used to access with a DC 5V power adapter. ② Power Indicator: It turns red when power ③...
HDMI Audio Splitter/De-embedder 1x2 3.3. Connection Procedure 1) Connect HDMI IN port of the HDMI Audio splitter with HDMI source device, such as a DVD player. 2) Connect HDMI OUT port of the HDMI Audio splitter with display device, such as an HDTV.
HDMI Audio Splitter/De-embedder 1x2 4.2. Product Assortment HDMI twisted pair extender ① ① ① ① 70m transmission distance in max over single CAT5e/CAT6 cable. Support 1080P@60Hz,48b/pixels,3D & 4Kx2K. Bi-directional and simultaneous RS232 & IR control. HDMI splitter 1x2 ② ② ② ② HDCP compliant, support 3D.
HDMI Audio Splitter/De-embedder 1x2 6. Panel Drawing 7. Troubleshooting & Maintenance 1) If the POWER indicator doesn’t work or no respond to any operation: The power adapter is not connected with alternating current power. The power switch is not on. 2) When there is no output signal: Check if the audio/video connector is broken (check with multimeter or oscilloscope).
HDMI Audio Splitter/De-embedder 1x2 8. Safety Operation Guide In order to guarantee the reliable operation of the equipments and safety of the staff, please abide by the following proceeding in installation, using and maintenance: 1) The system must be earthed properly. Do not use two blades plugs and ensure the alternating power supply ranged from 100v to 240v and from 50Hz to 60Hz.
HDMI Audio Splitter/De-embedder 1x2 9. After-sales Service 1) If there appear some problems when running the HDMI Audio splitter, please check and deal with the problems reference to this user manual. Any transport costs are borne by the users during the warranty. 2) You can email to our after-sales department or make a call, please tell us the following information about your cases.