Setting The Time - PROFECO 42250 Instruction Manual

13. Marking of the spot temperature
Press the MENU button to enter MENU mode, and then press the up and down
button to select the point temperature label MENU, press the SELECT button and
then press the up button to enter and exit the point temperature label. When the
point temperature mark turns on, it indicates that the hot or cold spot on the
screen needs additional assessment. If the mark is uneven, this indicates that the
user can concentrate on the measured pixel at a time.
14. Unit of temperature
The product displays the temperature in the unit ⁰C or ⁰F.
15. Mixing images
Use the aligned visible image and the infrared image. The mix image makes
understanding infrared images easier. The product can capture the visible image
of each infrared image to display the temperature distribution of target area
accurately. It helps to share with others. When this blend function is used, press
the "left" or "right" key to set the blend image from 0% to 100%.
16.

Setting the time

In the clock menu, you can set the time and date. Press the Menu button to enter
the Menu mode. Press up or down key to select clock menu. Press the select
button to enter the clock calibration mode. Press left or right key to select the
desired time parameter. Press the up or down button to add or subtract the value.
After setting, press the "menu" key to exit the menu.
20