Advertisement
General Safety Information
To ensure normal operation, follow these guidelines:
●
Appliance cover removal: This appliance is not user-serviceable; do not remove appliance
covers or attempt to service the appliance.
●
Ventilation guidelines: Do not block any openings in the system to avoid overheating the
appliance.
●
Water caution: Do not get any water on the appliance.
●
VMware appliances are intended for indoor use only.
Important: Any modification to this product, unless expressly approved by VMware Inc., could
void the user's authority to operate the equipment.
To reduce the risk of bodily injury, electrical shock, fire, and equipment damage, read this
document and observe all warnings and precautions in this guide before installing or maintaining
your VMware product.
Your VMware appliance should be integrated and serviced only by technically qualified persons.
You must adhere to the guidelines in this guide and the assembly instructions in your VMware
product manuals to ensure and maintain compliance with existing product certifications and
approvals.
WARNING: COOLING AND AIRFLOW
Carefully route cables as directed to minimize airflow blockage and cooling problems. For proper
cooling and airflow, operate the system only with the chassis covers installed. Operating the system
without the covers in place can damage system parts.
Do not operate your system with any cover(s) removed.
CAUTION: The internal components, can become extremely hot during operation. Allow sufficient time to
cool before handling.
The product is on whenever the system is plugged in. To remove power from system, you must
unplug the AC or DC power cord from the wall outlet. Your system may use more than one AC or DC
power cord. Make sure the AC or DC power cord(s) is/are unplugged before you open the chassis, or
add or remove any non hot-plug components.
WARNING: Rack Mount
The equipment rack must be anchored to an unmovable support to prevent it from tipping when a
server or piece of equipment is extended from it. The equipment rack must be installed according
to the rack manufacturer's instructions.
CAUTION:
Moving fan blade. Keep body parts away from the moving fan blade.
CAUTION: ESD ESD can damage disk drives, boards, and other parts. We recommend that you
perform all procedures at an ESD workstation. If one is not available, provide some ESD protection
by wearing an antistatic wrist strap attached to chassis ground—any unpainted metal surface—on
your server when handling parts.
Regulatory Safety Guide for Edge 510 Devices:
pg. 5
Advertisement
