UniPi Technology Neuron Technical Information

Models: Unipi Neuron
PLEASE RETAIN THIS DOCUMENT FOR FUTURE REFERENCE
CAUTION
The unit can be powered only by a power source in compliance with the unit's specifications. Using unsuitable power supply
can result in damage to the unit or connected devices. Unplug all power supplies and voltage sources before any
manipulation with the unit – danger of electrical injury or component damage!
Do not use the controller in potentially explosive atmospheres! The controller can be installed only by trained personnel with
sufficient qualification. The unit can be installed only in a suitable environment following the product's technical specifications
(indoor space with suitable temperature and humidity, waterproof distribution boxes, etc.).
All connected peripherals should comply with all standards and regulations relevant to the country and the intended use.
Working conditions
Power supply (SELV)
Power consumption
Power supply pole
reversal protection
The number and position of inputs and outputs can vary for a particular unit (see
Compliance information
Unipi Neuron complies with the requirements of EMC,
LVD, RED and RoHS regulations relevant for European
Union states.
General information
www.unipi.technology
⎓
+24 V
Max: 12–20 W (see the unit's
datasheet)
Yes
Technical and safety information
Ingress protection
(IEC 529)
Working and storage
temperature
Installation
Unipi Knowledge Base
WEEE Directive Statement for the European Union
Unipi Neuron cannot be disposed of as household
waste. Different rules for handling electric waste may
apply in other jurisdictions.
Technical support, Knowledge Base
h ps://kb.unipi.technology
IP20
Working: 0 °C ... +55 °C
Storage: -25 °C ... +70 °C
On a 35 mm DIN rail in a
distribution box (holder
included)
for details).