Advertisement
Quick Links
Product Description:
Congratulations on your new Aeon purchase!
The Aeon Series is a fixed frame projection screen that uses Elite's EDGE FREE® technology. The EDGE FREE®
design resembles a giant size flat panel TV display. The Aeon includes a bezel trim to further enhance the frame
appearance and absorb projector overshoot. An optional LED kit is available for backlighting.
The screen material included is our ISF Certified CineGrey 5D® which is a front projection material, precisely
formulated for environments with minimal control over room lighting. It was designed to enhance picture brightness,
offer accurate color fidelity, and improve contrast levels. The CineGrey 5D® is best for family rooms, educational
facilities, conference rooms, house of worship or any applications in which incident light is a factor.
In order for the CineGrey 5D® to maintain its projection qualities and optimum performance please refer to the list
below for proper maintenance and cleaning.
•
Use a dry microfiber cloth to remove dust from the screen's surface.
•
When cleaning, use a damp microfiber cloth with warm water to remove any marks.
•
Never rub or apply pressure when cleaning the surface.
•
Never attempt to use any solutions, chemicals or abrasive cleaners on the screen surface.
•
In order to avoid damaging the screen, avoid touching it directly with your fingers, pens/pencils or any other
sharp or abrasive objects.
12232022JA
Aeon CineGrey 5D® Series
EDGE FREE® Ceiling/Ambient Light Rejecting
www.elitescreens.com
Fixed Frame Screen
USER'S GUIDE
Version 1 (Spring type) | M Type
U-00241
1
Advertisement
Related Manuals for Elite Screens Aeon CineGrey 5D Series
Summary of Contents for Elite Screens Aeon CineGrey 5D Series
- Page 1 Aeon CineGrey 5D® Series EDGE FREE® Ceiling/Ambient Light Rejecting Fixed Frame Screen USER’S GUIDE Version 1 (Spring type) | M Type Product Description: Congratulations on your new Aeon purchase! The Aeon Series is a fixed frame projection screen that uses Elite’s EDGE FREE® technology. The EDGE FREE® design resembles a giant size flat panel TV display.
- Page 2 1. Frame and Edge Trim Parts List 2 pcs 2 pcs Main Frame Parts Edge Trim Parts item item vertical frame Part A. Part D. ½ horizontal frame Part B. Part E. ½ horizontal frame Part C. Part F. 2. Hardware Parts List M4*4 D5*4 M4*4...
-
Page 3: Frame Assembly
115’’ Item Parts List 103’’ 123’’ 135” 150’’ Center Joints- M4 (bottom position) Center Joints-D5 (top position) Elbow Joints M4 (bottom position) Elbow Joints D5 (top position) Side cover Center Joints- M4 Side cover Elbow Joints M4 M4x7 Screws Spring Spring Hook wall brackets Φ5x50 Wall Screws... -
Page 4: Back Side
Step 5: Secure the elbow joints by fastening them with M4x7 screws ( , 4 at each corner. Screen Material Step 6: Put on the white gloves (p) and carefully unroll the screen material on a clean surface from the roller to the other Back Side side as shown below. - Page 5 Center Support Bar Step 9: Insert the Center Support Bar (o) into the upper top groove on the back of the frame with the bottom end near the approximate center point of the frame and rotate it in at an angle so that both ends of the bar are in alignment with the groove.
- Page 6 To avoid ripples forming in the material it is imperative that all of the corners are properly wrapped around the edges as illustrated in the check mark diagrams. Note (after all springs have been attached): Correct material installation –Corners of the screen material are properly wrapped around the corner edges of the frame and material is evenly tensioned and flat, creating a nicely taut surface.
- Page 7 Connect edge trim frames (e/f) together using the M4 center joint (e) and secure with four of the M4x4 screws (m) as show in Step 1. Repeat for other side. Once both top and bottom edge trim frames have been connected, attach the vertical (left/right) sides edge trim frames (d) using the elbow joints (f) and secure with four M4x4 screws (m) on all corners, Step 2.
-
Page 8: Wall Installation
Step 15: Position the fixed frame screen onto the bottom wall brackets (fig. 1), lift and secure on the top wall bracket and push down at the center of the top of the (fig. 2) frame to secure. For Technical Support or an Elite Screens contact in your area, visit www.elitescreens.com 12232022JA www.elitescreens.com...