Do you have a question about the Home Safety System and is the answer not in the manual?
Questions and answers
Summary of Contents for PhoneWatch Home Safety System
Page 1
Contact us There are a number of ways you can contact PhoneWatch, we are always ready to help you with any questions you might have. See our contact details below. Customer Support: 0818 753 753 FAQs For any questions you may have please visit our website: phonewatch.ie...
Page 2
This user manual will help in your everyday use of the alarm system. Please take time to read through it, as it • The images are used by the PhoneWatch Alarm gives you important information and some good tips on Receiving Centre to determine appropriate action.
Page 3
Description of the Home Safety System How to use the keypad and keytag The control unit is the brain of the Home Safety System, it is fitted separately from the The keypad is equipped with a keytag reader allowing users to arm/disarm the alarm keypad and is hidden from potential view and damage.
Page 4
The status is not reversed by continuing to hold the keytag in front of the keypad. • You must remove the keytag from the keypad for a moment and then swipe again. • Even if the siren is turned off , this does not stop the transmission of the alarm signal to PhoneWatch.
Page 5
There is an alarm activation registered in Alert - 4 beeps in the event of alarm activation sent via keypad the memory Confirms the transmission of an alarm activation to PhoneWatch OFF: No alarm activation Light 4 “SENSOR/PANEL TAMPER WARNING”...
Page 6
Depending on how it is configured, the siren on the keypad may be activated. • An alarm signal is sent to PhoneWatch. Arming all or part of the system Note that when using this remote control, arming occurs immediately i.e. there is no delay. Only arm the system when you are outside the area to be secured.
Page 7
When this sensor is activated, it simultaneously takes Always ensure that all doors and windows are closed photographs that are transmitted to the PhoneWatch before you set your alarm. Alarm Receiving Centre. Components may differ slightly from the pictures shown...
Page 8
will provide you with this code. be diff erent to the code you use for the alarm itself, this 2. In the search bar at the top of the page, type in PhoneWatch 2. Enter your password is for added security.
Page 9
you log into the app, the following options will appear The PhoneWatch alarm app How to use your app STATUS This will show the current status of the system, from the image to the left, we can see this system is currently disarmed.
Page 10
Maintenance and recommendations Notes • We recommend you test your alarm system weekly. Prior to testing, contact our Customer Support department during normal business hours on 0818 753 753. • Avoid impacts to the components and ensure especially that you do not drop the wireless remote control.
Need help?
Do you have a question about the Home Safety System and is the answer not in the manual?
Questions and answers