Summary of Contents for XO Appliance XOUIM1565S
- Page 1 XOUIM1565S & XOUIM1565SP I worked really hard on this manual - XOUIM1565O & XOUIM1565OP so please read it... UNDERCOUNTER GOURMET ICE MAKER...
- Page 2 UNDERCOUNTER When buying any XO appliance you can be confident you have chosen a high quality, innovative and stylish product from a company that cares about you! If you require service or have questions, Help is only a phone call away - call: 973-403-8900 Talk to one of our undercounter experts.
-
Page 3: Where Things Are
where things are Before You Get Started 4 - 7 Installer Checklist Find Your Model Safet y Instructions Electrical and Grounding Instructions Installation Inst ruc tions 8 - 2 3 izes and Installation Dimensions Plumbing With & Without Drain Pump Reversing the Door Door panel Installation Outdoor Use... - Page 4 heres’s ten steps for a quick & easy install Inspect cabinet opening for water, drain and electrical connections. The 1/4” O.D. water supply line must include isolation valve and should include an inline water filter (consult manual). Do NOT use a self-piecing valve for the supply connection. Water supply must have a minimum pressure of 20 psi and a maximum of 80 psi.
-
Page 5: Stainless Steel
INDOOR / OUTDOOR GOURMET ICE MAKER STAINLESS STEEL XOUIM1565S & XOUIM1565SP PANEL READY XOUIM1565O & XOUIM156OP take a minute to circle your model above and record your serial number here in case you need it later... - Page 6 your safety matters Pl ease re ad t hro ugh comp l etely be fo re using your XO Unit Periodic maintenance is essential for safe operation - the unit must be easily pulled out for full access. The appliance must be positioned so that the plug and water shutoff are readily accessible. Empty your XO unit before attempting to move the appliance.
- Page 7 Failure To Follow All E l ec trical Safe t y M easures M ay Re sult in Se rious Inju r y, Fire O r D ea t h All electrical work should only be performed by an FOR INDOOR OR OUTDOOR USE: experienced, licensed electrician.
- Page 8 a perfect fit install under counter ALL XO UNDERCOUNTER UNITS ARRIVE PRE-WIRED WITH LOW PROFILE PLUGS FOR EASY INSTALLATION 34” MINIMUM (864mm) 7" (178mm) 4" (100mm) 15 ” (381mm) MINIMUM WHEN INSTALLING WITH THE HINGE SIDE NEXT TO A WALL - LEAVE ADEQUATE SPACE FOR YOUR DOOR HANDLE 90°...
-
Page 9: Top View
a perfect fit your xo is this big ( or small, as the case would be height & width XOUIM1565G & XOUIM1565GP ICE MAKER 3/4” HIGH (857mm) 14-7/8” WIDE (378mm) depth º TOP VIEW 23-3/8” (594mm) THE OVERALL DEPTH SHOWN (22-5/8”) INCLUDES THE DOOR WITH 3/4” PANEL. THE DEPTH OF THE ICE MAKER CABINET ONLY IS 21-3/16”... - Page 10 before you install check a few things Water source valve 115V~60Hz Water source tub Drain hose Is the installation location COOL, DRY, LEVEL and away from direct sun. The water supply valve must provide positive shut off capability and be readily accessible. Does the unit have a dedicated 115V three prong grounded outlet? (use GFI outdoors) The Cold Water supply is 1/4”...
-
Page 11: Water Quality
water quality All water contains some impurities and minerals. Your XO Ice Maker is designed to produce crystal clear, gourmet ice. It does this by reducing the mineral content in the water as the ice is forming. PURER WATER YIELDS PURER ICE. Cubes are formed by cold water spraying against a chilled mold. -
Page 12: Rear View
Water supply should be between 20psi and 80psi. Attach the drain to the connection indicated here If you are installing an XOUIM1565S unit with a gravity drain, the line must be pitched down WATER 1/4”... - Page 13 INSTALLING THE XOUIM1565S without a drain pump. Position the ice maker in front of the opening. Level the unit using the leveling legs. Wash and flush the water supply tube and connect the unit to the cold water isolation valve.
- Page 14 with drain pump INSTALLING THE XOUIM1565SP with DRAIN PUMP. Position the ice maker in front of the opening. Level the unit using the leveling legs. Wash and flush the water supply tube and connect the unit to the cold water isolation valve. Cut the 3/8”...
-
Page 15: Reversing The Door
reversing the door Your XO Ice Maker is shipped with the hinge on the right hand side but it can be easily reversed. IMPORTANT NOTE: Stainless Steel door models and Panel Ready models use different hinges and Panel Ready models require additional steps when reversing the door. TOP HINGE 1. - Page 16 reversing the door cont. 3. At the rear of the unit, there are three (3) screws along the top. Remove these screws. TOP COVER On the top front of the unit, there is one (1) additional screw on the left hand side, remove this screw. The Top Cover plate will now lift off.
- Page 17 overlay panel dimensions xouim1565o & xouim1565op 3/4" 14 3/4" 29 3/8” FRONT MIN. The panel has a minimum height of 29 3/8” - If making the panel 29 3/8” tall no further adjustments are needed. If the panel is taller than 29 3/8” proceed to pages 18 and 19, a notch or recess is required.
- Page 18 overlay panel dimensions xouim1565o & xouim1565op 14 3/4" Door panels taller than 29 3/8” require a notch as seen in Detail A & B on the hinge side. If making the panel 29 3/8”, no notch (detail A,B) is required. The bottom of the notch should always be 29 3/8”...
- Page 19 overlay panel dimensions xouim1565o & xouim1565op handling handleless doors: Handleless doors have a profile similar to that shown SIDE VIEW REAR VIEW 5/8” 5/8” 1” 29 1/4” TO BOTTOM OF DOOR Instead of a notch, if the design of the door will allow, a recess can be cut out with a router to accommodate the hinge extension.
- Page 20 installing the overlay panel Installing the overlay panel is easy if you folllow these simple steps. You will need the following tools: A drill with 3/16” and 5/16” bits - and a #2 Phillipshead screwdriver While supporting the door, remove the two (2) screws (shown in RED) that hold the Top Hinge in place.