Download Print this page

Jensen MWR75 Installation Instructions page 2

Marine wired remote control

Advertisement

Wiring
Once the remote has been mounted, route the cable from the remote and connect the cable to the
radio. Note the connector polarity on the extension cable. The 18 foot extension cable may be
used to connect the remote to the radio. Up to two additional extension cables (MWREXT) may be
purchased and used to extend the reach of the remote up to 54 feet. Important: When connecting
the cables, be sure to route the extension cable away from sharp objects, corners, and places
where it might get pinched, as this could affect performance and cause damage to the unit. Up to
two more remote controls can be added with a "Y" cable adapter (MWRYCBLS).
Operation / Operación / Fonctionnement
Power
Volume
POWER
MWR75
Band
BAND
VOL
INFO
VOL
Clock/Info
Tuning
MODE
Mode
Pause
MUTE

Advertisement

loading