Table of Contents
Advertisement
Overview of programmes
en
Programme/type of laundry/information
' Rinse / 0 Spin / [ Drain
Combined extra programme for rinsing and spinning the laundry,
and draining the rinsing water
The Rinse Plus button is activated at the factory for this
Note: .
programme.
If you only want to spin the laundry: Deactivate the
Rinse Plus button and, if required, adjust the spin speed.
If you only want to drain the water: Deactivate the Rinse Plus
button and select the spin speed 0.
Active Oxygen Refresh Ø
Mixed load of cottons, synthetic fabrics, silk, satin and wool;
programme for removing odours, e.g. the smell of cigarettes and
kitchen odours ~ Page 35
Notes
Do not exceed the maximum load.
■
Not a wash programme/not suitable for removing stains or
■
sweat.
Load dry laundry only.
■
Before loading the laundry, wipe the drum dry if necessary,
■
turning it as you do so to remove all water.
Û Drum Clean
Programme for cleaning and caring for the drum and the outer
tub
Run the programme, e.g.:
Before using the appliance for the first time,
■
If you regularly wash at low temperatures (40 °C or lower) or
■
If you have been away for an extended period and odours
■
have built up.
Notes
The Û Drum Clean indicator light will flash if you have not
■
used a programme at 60 °C or higher for a long time.
Run the programme without laundry.
■
Use standard washing powder or a detergent containing
■
bleach. To prevent foaming, only use half the amount of
detergent recommended by the detergent manufacturer. Do
not use detergents intended for woollens or delicates.
*
Reduced load for the SpeedPerfect setting
** Max. spin speed depends on the model
*** Programme depends on the model
****Can be selected for washing temperatures up to 40 °C
32
Settings
-
-
$, 0 - 1600** rpm
Rinse Plus,
Easy Iron
Max. 1 kg
-
-
-
0 kg
80, 90 °C
1200 rpm
Active Oxygen Ø
Advertisement
Table of Contents
