Advertisement
Quick Links
Advertisement
Summary of Contents for HELLER HGH90S
- Page 1 HGH90S/HGH90GG Free Standing Oven...
- Page 2 Service shall only be carried out by authorised personnel.
- Page 3 Overall diamensions,connecting points of gas and electricity..........45...
- Page 4 see the duplicate rating plate near the appliance.
- Page 5 DO NOT USE OR STORE FLAMMABLE MATERIAL IN THE APPLIANCE STORAGE DRAWER OR NEAR THIS APPLIANCE. DO NOT SPRAY AEROSOLS IN THE VICINITY OF THIS APPLIANCE WHILE IT IS IN OPERATION. DO NOT MODIFY THIS APPLIANCE. MUST NOT B E I N S TA L L E D I N M A R I N E C R A F T O R I N CARAVANS For ULPG, connect the ULPG test point adaptor by using approved gas thread tape compound to the gas inlet.
- Page 6 During use the appliance becomes hot. Care should be taken to avoid touching heating elements inside the oven. WARNING: Accessible parts may become hot during use. Young children should be kept away. 24.DO NOT USE OR STORE FLAMMABLE MATERAILS IN THE APPLIANCE STORAGE DRAWER OR NEAR THIS APPLIANCE”...
- Page 7 by a person responsible for their safety. 33.Children should be supervised to ensure that they do not play with the appliance. AS/NZS 5601 Only an officially authorised technician installer should connect the appliance. F i t the duplicate data plate (supplied in separate bag) on a surface adjacent to the appliance.
- Page 8 of adequate strength 1.20...
- Page 9 (Australian Approved) AS/NZS 5601 Once the cooker is in the installed position check that the cooker cannot tilt forward.
- Page 12 certified flexible hose. Flexible Hose, which complies with AS/NZS 1869 (Australian Approved), 10mm ID, class B or D, no more than 1.2m long and in accordance with AS/NZS 5601. 3. connect the ULPG test point adaptor by using approved gas thread tape compound to the gas supply.
- Page 13 remove Natural gas regulator.Fit LPG test point adaptor. adjust minimum burner settings. In case the appliance fails to operate correctly after all checks have been carried out, refer to the authorised service provider in your area.
- Page 14 (for Natural Gas) Test Point Assembly (for Universal LPG)
- Page 16 Checking the cooker stability. Check that the restraining chain is securely fitted to the wall and cooker with adequate fixing devices and that the cooker cannot tilt forward.
- Page 17 In case the appliance fails to operate correctly after all checks have been carried out, refer to the authorised service provider in your area.
- Page 18 Type: ULPG Consumption...
- Page 19 Type: NG Consumption...
- Page 23 deformed...
- Page 28 ELECTRIC...
- Page 37 Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch the surface, which may result in shattering of the glass. Cleaning cooker's surface each time it is used, cleaning burners and pan support regularly, at least one time per month.
-
Page 40: Replacing The Oven Seal
Replacing the oven If the oven seal is faulty, it must be replaced by an authorised seal person . A faulty oven seal can result in high energy losses. The fronts of adjacent units could be damaged. - Page 42 local authorised person, AS/NZS 5601 - Gas Installations (for Australia) NZS 5261 – Code of Practice for the Installation of Gas Burning Appliances and Equipment (for New Zealand) Local gas fitting regulations AS/NZS 3000 – Electrical Installations (Wiring Rules) Building codes Any other relevant statutory regulations.
- Page 47 3.Check that the anti-tip device is installed properly by checking that the cooker cannot tilt forward.
- Page 48 If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Need help?
Do you have a question about the HGH90S and is the answer not in the manual?
Questions and answers