Page 2
Furthermore, Multi-Tech Systems, Inc. reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Multi-Tech Systems, Inc., to notify any person or organization of such revisions or changes.
FCC Regulations for Telephone Line Interconnection 1. No repairs are to be made by you. Repairs are to be made only by Multi-Tech Systems or its licensees. Unauthorized repairs void registration and warranty. Contact Multi-Tech Systems, Inc. for details of how to have repairs made.
Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate. Cooling Requirements The ambient operating temperature of the CC9648 chassis is 0° C to 40° C. CommPlete Communications Server...
• To reduce the risk of shock, all openings should be covered during normal operation of the equipment. • Both supplies must be removed to remove all power from the chassis. The supplies are connected in parallel, so that both power supplies supply power to all power busses in the chassis. To remove all power from the left power supply, disconnect the left supply connection;...
Vigtige Sikkerhedskrav • Det er ikke nødvendigt at foretage manuelle justeringer af udstyret, for at tilslutte udstyret til elektrisitetsuettet indenfor de navute spændingsfrekvensgreuser. • Strømforsyningsledningen er beregnet til at fungere som afbryder. Stikkontakten skal installeres nær ved udstyret og skal være let tilgængelig. •...
3 Warranty, Service, and Technical Support Limited Warranty...12 Service...12 Technical Support ...13 Recording Product Information...13 The Multi-Tech BBS ...14 Logging onto the Multi-Tech BBS ...14 Downloading a File ...14 Reading a Message...15 Leaving a Message...15 Bulletins ...15 About CompuServe...15 About the Internet ...16 About the Multi-Tech Fax-Back Service ...16...
CC9648 Chassis User Guide Introduction The CC9648 chassis is the housing for the CommPlete Communications Server. It can contain one chassis controller module, two power supply modules (one is required, and two are recommended), four independent RASCard servers, and 96 modems (12 modem cards, with eight modems per card) or four PRI cards.
Environmental Dimensions Weight Limited Warranty CommPlete Communications Server CC9648 Temperature range: 0°–40° C (32°–104° F) Humidity range: 0–95% (noncondensing) 31.1 × 48.3 × 36.8 cm (12.25 × 19 × 14.5 in.) H × W × D 11 kg (25 lb.)
Page 12
CC9648 Chassis User Guide CommPlete Communications Server...
The CC9648 is designed to be installed in a standard 19-inch-wide rack cabinet. Figure 1 shows a fully loaded chassis with one controller card, two power supplies, and a full complement of RASCards and modem cards.
Installation • If the chassis is installed in a closed or multi-rack assembly, the operating temperature of the rack environment may be greater than the ambient temperature. Be sure to install the chassis in an environment that is compatible with the maximum rated ambient temperature. See technical specifications.
CC9648 Chassis User Guide Important Safety Considerations Fuse Replacement There is one replaceable fuse in the PS9648 power supply. Only qualified service personnel may replace the fuse, with one of the same type and rating as indicated. Caution: For continued protection against risk of fire, replace only with same type and rating of fuse (250 V, 12 A, Type F).
The rear of the CommPlete Communications Server provides connections to power, communications lines, and configuration hardware, as shown in Figure 2. Only the power connectors are part of the CC9648 chassis. The other connectors are mounted on removable cards or modules, and are documented in their respective user guides.
Page 18
CC9648 Chassis User Guide CommPlete Communications Server...
Multi-Tech products usually offers the quickest and most economical repair option. If necessary, you may send your Multi-Tech product to our Mounds View factory in the USA. A modem that is shipped to us from outside the USA must have a Returned Materials Authorization (RMA) and shipping instructions.
2439 (USA and Canada) or (612) 785-3500 (local and international). Please record CC9648 information in the spaces provided below, and have it available when you call. If your CC9648 requires service, the techni- cal support specialist will guide you on how to send it in.
There is also a - message service that lets you request additional information. The phone number for the Multi-Tech BBS is (800) 392-2432 (USA and Canada) or (612) 785-3702 (local and international).
Message Menu. Leaving a Message The Multi-Tech BBS has no public discussion area. To leave a personal message, select the Message Menu by typing M at the Main Menu. Type E , then press E the recipient (or “Sysop”), the subject, and the message text.
CC9648 Chassis User Guide About the Internet Multi-Tech is a commercial provider on the Internet, and we retrieve e-mail messages from the following mailboxes on a periodic basis: tsupport@multitech.com Technical Support mtsmktg@multitech.com mtssales@multitech.com Sales Dept. international@multitech.com International Marketing & Sales writers@multitech.com Publications Dept.
Need help?
Do you have a question about the CommPlete CC9648 and is the answer not in the manual?
Questions and answers