Onstate Technologies PMSW27 Series Quick Start Manual

Onstate
Technologies
PMSW27 Series Occupancy PIR Motion Sensor Auto Switch Wall Mount
Onstate occupancy passive infrared (PIR) motion sensors automatically shut off power to lights when
the room is not occupied to provide energy savings. It could be used to meet local energy use
standards and requirements. The PMSW27 uses two high sensitivity sensors and a multi-level, high-
density Fresnel lens to provide overlapping 270
reliable, consistent operation. It features relay output, adjustable delay time, adjustable sensitivity and
daylight OFF level to suit multiple applications. The PMSW27 triggers the relay to turn on the lights
once motion is detected and will reset the ON-time every time it detects motion for continuous
operation. Onstate occupancy motion sensors have a short payback period (less than a year) and
provide long-term energy savings.
Specifications:
Power: 120VAC, 6W Max.
24VDC (20-28V), 1W Max.
Load Control: Relay (NO), works with inductive loads.
1200W @ 120VAC, 15A @ 24VDC.
Daylight ON mode: Adjustable, <15Lux to daylight
ON-Time: Adjustable, Min: 10 seconds. Max: 9 minutes
Sensitivity: Adjustable, min-max
Detection: up to 40ft radius, 270 degrees
o
Temperature: -10 C to +40
Installation Height: 5-12 ft.
Environment: Dry, non-condensing location
Status Indicator: Green/Orange LED, motion detect.
Dimension: 4.65" (D) x 2.25" (H)
Weight: 0.5lb (220g)
Mounting: Wall mount, electrical box
Wiring: 3 wires (120V), 4 wires (24V)
Warranty: 2 years
Part Coding: PMSW27x-y
x= voltage. S=120VAC (standard), L=24VDC (low voltage)
24V model can be used with Leviton occupancy sensor power packs. Also works for
24V LED lights for automatic control. Other low voltage models available.
y=options. 2=AUTO (Automatic).
Onstate Technologies BC, Canada
Patent Pending Specifications subject to change without notice.
PMSW27 Series
Occupancy PIR
Motion Sensor
Applications:
- Intermittent use areas
- Offices
- Storage rooms
- Restrooms
- Study rooms
- Conference rooms
- Display/show areas
- Warehouses
- Hallways/corridors
- Lobbies
o
coverage while reducing no-sensing zones for
o
C
Tel. 1-877-607-7811 On-tech@OnstateTech.com
Product Technical Information- Power Electronics
Features:
- Long life, low maintenance
- SMD technology design
- Automatic operation
- Integrated PIR sensor unit
- Relay output
- 2 dual-element PIR sensors
- 270
- Adjustable ON-Time
- Adjustable daylight mode
- Adjustable sensitivity
Two PIR sensors
tech PMSW27 PIR occupancy sensor Rev1
PMSW27 Series
S e e i n g wi t h L E D L i g h t i n g
o
coverage
Relay output
Page 1 of 4
TM
09/11