Advertisement
GW-002 Series
SIM Card and APN Setup Guide
Step 13: From the gateway user interface
login screen, enter the password
on the rear label of the unit.
When entered successfully, the
user will be prompted to create
a new password.
Setting the APN (Access Point
Name) for the GW-002
Step 14: From the main home page of the
user interface, click the Settings
tab and then click the LTE
option.
Step 15: Change the APN from
J108.com.attz to NXT17.com.
attz. Then click Apply.
Step 16: Reboot the GW-002 by powering
off and powering back on the
device. Allow time after the
reboot for the GW-002 device.
Once the device has completely
rebooted, the device will be connected to
the LTE network.
2
omega.com
Advertisement
