Installation Requirements - D-Link DSL-504T User'smanual

DSL-504T DSL Router User's Guide

Installation Requirements

In order to establish a connection to the Internet it will be necessary to provide information to the
Router that will be stored in its memory. For some users, only their account information (Username
and Password) is required. For others, various parameters that control and define the Internet
connection will be required. You can print out the two pages below and use the tables to list this
information. This way you have a hard copy of all the information needed to setup the Router. If it
is necessary to reconfigure the device, all the necessary information can be easily accessed. Be
sure to keep this information safe and private.
Low Pass Filters
Since ADSL and telephone services share the same copper wiring to carry their respective signals,
a filtering mechanism may be necessary to avoid mutual interference. A low pass filter device can
be installed for each telephone that shares the line with the ADSL line. These filters are easy to
install passive devices that connect to the ADSL device and/or telephone using standard telephone
cable. Ask your service provider for more information about the use of low pass filters with your
installation.
Operating Systems
The DSL-504T uses an HTML-based web interface for setup and management. The web
configuration manager may be accessed using any operating system capable of running web
browser software, including Windows 98 SE, Windows ME, Windows 2000, and Windows XP.
Web Browser
Any common web browser can be used to configure the Router using the web configuration
management software. The program is designed to work best with more recently released browsers
such as Opera, Microsoft Internet Explorer® version 5.0, Netscape Navigator® version 4.7, or later
versions. The web browser must have JavaScript enabled. JavaScript is enabled by default on
many browsers. Make sure JavaScript has not been disabled by other software (such as virus
protection or web user security packages) that may be running on your computer.
Ethernet Port (NIC Adapter)
Any computer that uses the Router must be able to connect to it through the Ethernet port on the
Router. This connection is an Ethernet connection and therefore requires that your computer be
equipped with an Ethernet port as well. Most notebook computers are now sold with an Ethernet
port already installed. Likewise, most fully assembled desktop computers come with an Ethernet
NIC adapter as standard equipment. If your computer does not have an Ethernet port, you must
install an Ethernet NIC adapter before you can use the Router. If you must install an adapter,
follow the installation instructions that come with the Ethernet NIC adapter.
Additional Software
It may be necessary to install software on your computer that enables the computer to access the
Internet. Additional software must be installed if you are using the device a simple bridge. For a
bridged connection, the information needed to make and maintain the Internet connection is stored
on another computer or gateway device, not in the Router itself.
If your ADSL service is delivered through a PPPoE, PPPoA or Static IP connection, the information
needed to establish and maintain the Internet connection can be stored in the Router. In this case,
it is not necessary to install software on your computer. It may however be necessary to change
some settings in the device, including account information used to identify and verify the
connection.
vi