Advertisement
Bay Bunk Bed
Assembly Instructions - Please keep for future reference
Safety and Care Advice
• Important: Please read these instructions fully before starting assembly.
• Do not discard any of the packaging until you have checked that you have all the parts and the pack of fittings.
• Discard all extra fittings and keep fittings out of reach of children.
• Assemble this product on a flat and protected surface.
• Because of the size of this unit, it is recommended to assemble it in the room intended for use.
• At least 2 people are required to assemble this product.
• Assemble all parts loosely before tightening any bolts.
• Approximate time of assembly: 60 minutes.
Warnings:
• Always use the ladder for entering and leaving the upper bunk.
• The recommended mattress size is W39 x L75 inches.
• Ensure thickness of mattress does not exceed 6¾ inches.
• Do not use the bunk bed if any structural part is broken or missing.
• Please prohibit more that one person on the upper bunk.
• Please advise your children to only enter and leave the upper bunk by using the ladder.
• Please prohibit children from jumping on the upper and lower beds.
• Children can become trapped between the bed and the wall. To avoid risk of serious injury the distance between
the top safety barrier and the wall shall not exceed 3 inches or shall be more than 9 inches.
• Do not allow children under 6 years of age to use the upper bunk due to risk of injury and falls.
• STRANGULATION HAZARD - Never attach or hang items such as ropes, strings, cords, harnesses and belts to
any part of the bunk bed.
Care and maintenance:
• Please clean the product using either damp (not wet) cloth and a mild domestic soap solution or by using an
appropriate polish.
• Do not use abrasive materials when cleaning.
• From time to time, check that there are no loose bolts on this unit.
MODEL: 14421 A/B
4 DC Bay Bunk Bed
MODEL: 14421 A/B
Page 2 - 7
Advertisement
