Samsung HG43NT678UF Service Manual page 30

Hotel Option menu Item
Self Diagnosis for HTV
Software Update
Sound Bar Out
Contact Samsung
Standby LED
Boot Logo
TV Reset
BLAN Power
Home menu
Home Menu Display
Home Menu Editor
Home Menu Auto Start
REACH Solution
REACH RF Mode
REACH Channel
Description
Lets you check the state of Pro:Idiom and its communication with
the SI STB or SBB. If you have any problems with the Pro:idiom
encryption channel or the communications with the SI STB or SBB,
use this diagnosis function. If PI DTV Channel Key Loss (Pro:Idiom
DTV Channel Key Loss) appears to have failed and the Pro:Idim
encryption channel has failed to play content, first check the
broadcasting systems related to Pro:Idiom encryption. If your
broadcasting system does not have a problem, contact Samsung
Service. If STB SI Vendor Setting appears to have failed and
communication with the SI STB or SBB has failed, first check your SI
STB or SBB. If your SI STB or SBB does not have a problem, contact
to Samsung Service.
Lets you upgrade the TV Software with a USB flash dirve.
If the Samsung Sound Bar device is connected to this TV, this item
lets you to select where the TV sound is outputted when the TV is
turned on.
• ON: When the TV is turned on, the TV sound is automatically outputted in
the Sound Bar device only.
• OFF: When the TV is turned on, the TV sound is automatically outputted in
the TV speaker device.
Display the web site of related Samsung service center, software
version, and Mac address information.
When the TV is in standby mode, you can configure the settings of
the power indicator.
• ON: The LED is on.
• OFF: The LED is off.
To enable or disable displaying the Samsung logo when the TV turns
on.
Returns all settings on the TV to theirfactory defaults.
BLAN Power Turns the built-in BLAN module functions on or off.
• This function is only available when Hospitality Mode is set to Interactive
Mode and SI Vendor is set to EBL.
Activate Home Menu in Standalone mode for user.
• ON: Home Menu enabled.
• OFF: Home Menu disabled.
In Standalone mode, you can quickly access to various features
such as Source, Media Play etc and settings such as Picture Size,
Language, etc.
Edit and manage TV functions to be used from Home Menu.
This option allows you to set Home Menu as first screen for user.
• ON: Home Menu is shown as first screen.
• OFF: Do not show Home Menu as first screen.
Turn on or off the REACH RF Mode. When set to on, the TV can
operate with the REACH Server (Modulator) through the RF cable.
This is a DTV cable channel PTC number for receiving REACH data
when the REACH RF Mode set to on. The value must be same as the
value set on the REACH Server (Modulator).
2. Product specifications
2-21