DARK IJ LAMP METAL TABLE Assembly

Assembly Doctor For Ij-Lamp Metal TABLE
ij-lamp
Assembly Doctor For Ij-Lamp METAL TABLE
ASSEMBLY DOCTOR
260
260
1 Connect the plug
1. Connect the plug
2 Place the lamp. Respect the wattage.
2. Place the lamp. Respect the wattage.
1. Connect the plug
2. Place the lamp. Respect the wattage.
* Please use gloves for handling and installation of light fixture. This will reduce finger-
* Please use gloves for handling and installation of light fixture.
prints and scratches.
This will reduce fingerprints and scratches.
* Please use gloves for handling and installation of light fixture.
This will reduce fingerprints and scratches.
NOT SUITABLE FOR HALOGEN
NOT SUITABLE FOR HALOGEN
OR INCANDESCENT BULBS.
OR INCANDESCENT BULBS.
Light Source
Touching the LED can result in permanent damage of the light source.
The light source contained in this luminaire shall only be replaced by the
manufacturer or his service agent or a similar qualified person.
Always be properly grounded when touching leads or circuitry inside the luminaire.
DARK
DARK
!!! Never connect the fixture on 220-240V ac without driver.
www.dark.be
Lighting fixture is constant current driven.
www.dark.be
Dark at night
For drivers purchase, contact your sales contact.
Vliegplein 43 - 9991 Maldegem
Always connect constant current leds in serial connection.
Dark at night
Belgium - Europe
Vliegplein 43 - 9991 Maldegem
Check catalogue P 488-489 (Installation of LED)
tel
Belgium - Europe +32(0)50/71.81.40
fax
+32(0)50/71.81.38
tel +32(0)50/71.81.40
mail info@dark.be
fax
+32(0)50/71.81.38
mail info@dark.be
Lamp possibilities :
Lamp possibilities :
max
TCA-SE
11
E27
max
TCA-SE
Watt
11
E27
Watt
max
12
LED E27
max
Watt
12
E27
LED
Watt
© DARK 2021 DARK has the right to change any technical data, dimensions,
colors and characteristics without prior notice. All rights reserved.
Please always check the latest technical data sheet on www.dark.be.
metal table
260
1. Connect the plug
2. Place the lamp. Respect the wattage.
* Please use gloves for handling and installation of light fixture.
This will reduce fingerprints and scratches.
NOT SUITABLE FOR HALOGEN
OR INCANDESCENT BULBS.
DARK
www.dark.be
Dark at night
Vliegplein 43 - 9991 Maldegem
Belgium - Europe
tel +32(0)50/71.81.40
fax
+32(0)50/71.81.38
mail info@dark.be
230 V
Alu-Metal-Brass
0.3m
0.3m
Design by Jacob de Baan for DARK
Design by Jacob de Baan for DARK
design Jacob de Baan for dark
2
Lamp possibilities :
max
TCA-SE
11
Watt
max
12
LED
Watt
IP20
850 °C
230 V
IP20
850 °C
850°
230 V
DARK at night nv
Vliegplein 43 / 9991 Maldegem / Belgium
+32 50 71 81 40 / info@dark.be / www.dark.be
V0 19/08/2016
V0 19/08/2016
V—22/08/22
2
1
1
E27
E27
IP20
1 kg
1
kg