Page 1
RGBWW Transport Kit C H R O M A • S E R I E S Thank you for your purchase of the ProMaster Chroma CL68RGB LED Light. This RGBWW light is capable of producing beautiful white light with an adjustable color temperature range of 2,500K to 8,500K.
Figure 1: Parts Diagram: Figure 2: 1) Light Stand Mount 2) Yoke 3) Light Stand Connection Knob 4) Tilt Control Knobs 5) Barn Doors 6) Barn Door Attachment Bolts 7) LCD Display 8) NP-F Battery Slots 9) Battery Release Buttons 10) Power Switch 11) Main Control Knob 12) MODE Button...
Assembly: The CL68RGB comes fully assembled, including the barn doors. If you prefer to remove the barn doors, simply take out the 4 Barn Door Attachment Bolts (6). They can be removed or reinstalled anytime you like. Mounting the Light: Slide the base of the Light Stand Mount (1) onto the top of a sturdy light stand that has a 5/8”...
Page 4
Connecting to Batteries (NP-F or via D-Tap) Although the CL68RGB includes an AC adapter for connecting to a wall outlet, it can also run using battery power. There are two battery options for you to choose from: 1. Using NP-F type batteries: Locate the NP-F Battery Slots (8) on the back of the light. Using two compatible NP-F type batteries (7.4V / 4,400 mAh minimum), insert them one at a time into these slots with their contacts facing toward the center of the light.
Using the Light: Adjusting Brightness The CL68RGB’s brightness can be changed anytime, while the light is in any mode. Simply press the BRT Button (13) to highlight the current brightness setting on the LCD Display (7) and turn the Main Control Knob (11) clockwise to increase it, or counterclockwise to decrease it.
Page 6
16 – TV (Slow) 17 – TV (Medium) 18 – TV (Fast) 19 – Candle (Slow) 20 – Candle (Medium) 21 – Candle (Fast) 22 – Fire (Slow) 23 – Fire (Medium) 24 – Fire (Fast) 25 – Fireworks (Slow) 26 –...
Safety Precautions: 1) The CL68RGB is not water resistant. Keep it away from rain, snow, high humidity, moisture, and liquids. Do not allow it to get wet or submerse it. 2) Do not touch the light or any accessories or parts of the light with wet hands. 3) Avoid contact with solvents, gasoline, grease, oil, paint, and detergents.