Advertisement
QUICK START GUIDE
ADJUST THE TIME ZONE
All NVR units sold by i3 international are pre-set to Eastern Time zone (UTC -5:00). If
your NVR is in a different time zone,
you must set the correct time zone on the first
system start up.
If the NVR is later re-located to a different time zone, this setting must be changed
again. All previously-recorded data must be formatted after each time zone change.
Failure to do so may result in system malfunction.
To change your NVR time zone, unlock the NVR first, then Go to Start menu and type
Control Panel. In Control Panel, click Date and Time > Change time zone...
Set your NVR's Time zone from the drop-down menu and click OK.
ADD VIDEO INPUTS to SRX-PRO v7
Make sure to set unique IP address to every IP camera/encoder before adding it to SRX-Pro
v7. Use i3's ACT (Annexxus Configuration Tool) utility for i3 cameras and encoders. ACT is
pre-installed on your NVR.
1. Launch i3 Pro Setup from the Desktop or from the SRX-Pro Monitor.
Or
2. Enter your administrator Username and Password and click LOGIN.
3. Click the Add tile.
4. If using SRX-Pro v.7.1, find your cameras in the list of UNASSIGNED CAMERAS.
You may need to click REFRESH.
If using SRX-Pro v.7.2 and above, click SEARCH and
wait until your cameras are discovered.
5. Enter correct login credentials for all devices with "Login failed"
(if any).
Select all "Login failed" devices that share login credentials and click
6. Enter device's Username and Password and click
Green checkmark
indicates that the camera/encoder is ready to be added.
7. Select all devices with a green checkmark and click
Your cameras/encoders have now been added and are set to record based on Sensor +
Motion schedule.
Scan this QR code or visit ftp.i3international.com to view
and download Annexxus Configuration Tool (ACT) and
additional documentation.
Contact our Technical Support team at: 1.877.877.7241 or
support@i3international.com if you have any questions
or concerns regarding camera installation or if you require
software services or support.
i3 INTERNATIONAL INC.
UR5-Ai / URX-Ai, i3Ai/SRX-Pro Server
LINKING SRX-PRO SERVER to i3AI SERVER
When running i3Ai Server on the same NVR as the SRX-Pro Server, or on a
different unit on the same network, an active connection between the two must
be established.
1. In i3Ai Server, add one or more cameras and configure as needed. Make a note
of the camera's IP address.
2. In SRX-Pro Setup, go to Cameras.
3. Use the search field to fine a camera already added to the i3Ai Server. Use
camera IP address, name, model or other identifying information.
B. If the i3Ai server is installed on a different unit on the network, click ADD,
fill out the i3Ai server connection information and click ADD again.
7. When done, click
Status changes to CONNECTED.
LIVE VIDEO
Use Video Pilot Client application (pre-installed on your NVR) to view Live video and
to Search/Backup recorded video.
1. Launch i3 Video Pilot Client from the Desktop or from the SRX-Pro Monitor.
2. Mouse over localhost tile and click Connect.
3. Login using SRX-Pro administrative or user credentials
Tip: To view Live video instantly using Guest account,
go to SRX-Pro Setup > Server > User
management > User groups and edit the Idle
group. In Permissions, expand Live - Search - Backup
drop-down and enable Live mode
select cameras.
symbol
If using Guest account to view Live localhost video, you must Login before
.
being able to Search or Backup video. To protect the security of your system,
Logout when done.
•
Double-click on any channel to bring it into Full Screen mode.
.
•
Hover over any channel to see on-screen control panel.
•
Click on the screen division icon to change current display mode.
•
Use the Search bar to quickly locate camera by camera name, model or IP.
QR Code for Complete
User Manual and ACT
4. Click on the camera thumbnail and
go to i3Ai setup tab.
5. Click on the Connect i3Ai toggle to
turn it ON.
6. In i3Ai information,
A. If the i3Ai server is installed on
the same NVR as SRX-Pro server,
select Ai server (localhost).
6A
. Wait until the
Or
for all or
6B
1.866.840.0004
www.i3international.com
Advertisement
