Kokoon nightbuds Quick Start Manual

Connecting for the first time
1. MyKokoon app
Install and open the MyKokoon app.
2. Charging
Connect the headphones to a
power source, using the USB-C
cable.
3. Powering on and Pairing*
To turn the headphones on and
enter pairing mode, hold the
bu on until the LED flashes blue.
Turn on Bluetooth® on your
phone. Select "Kokoon Nightbuds"
in your Bluetooth® se ings.
*Before powering on and pairing, the device must be o .
*Pairing only required for first connection.
For further information go to:
help.kokoon.io
LED
USB-C
LED
LED indicator
Flashing
White
Powering o
Green Charging
Blue Pairing mode
(ready to pair with
a new device)
Action summary
General
On / O
On + Pairing
Volume up
Volume down
Charging status
Using app or media
Play / Pause
Skip forward
Skip backward
Incoming call or in a call
Reject call / End call
Answer call
Important care information
To maintain good sound quality, clean
the acoustic nozzle regularly using an
alcohol-based cleaner on a co on bud.
Clean the silicone sleeves with soapy
water, rinse and dry thoroughly before
re-assembly.
For further information go to:
help.kokoon.io
Single pulse
Powering on
Fully charged
Connected
Press for ~2 sec
Press for ~5 sec
Single click
Single click
Connect to power source
Single click , when charging
Disconnect from power source
Single click
Double click
Double click
Press for 1 sec
Single click