PROAIM WKST-LTWT-EDC Assembly Manual page 2

Laptop Workstation Setup
•
Remove the nonslip mat from the top of the
laptop workstation (Not
in the image.
•
Loosen the screws from the top of the
bottom adapter using the Allen key and then
remove them.
•
After removing all the bolts from the
workstation, remove the C-stand adapter
(Not Included).
EDC Box Setup
•
Then attach the Proaim EDC WorkStation
(Not Included) by sliding it into the side part.
•
To attach the C-stand adapter, align it to the
threads of the Proaim EDC at the backside of
the workstation (Not
•
After aligning, insert the bolts by matching
them with the threads at the backside of the
workstation (Not Included)
the C-stand adapter.
Included), as shown
Included).
and then attach
2