ORiNG RFA-O5-NF2-W3GG Series Quick Installation Manual

Rail
MIMO
Q I
A n t e n n a
uick nstallation
Dimension (Unit=mm)
Top View
Side View
Bottom View
Q I G
RFA-O5-NF2-W3GG Series
RFA-O5-NF2-W3GG Series
G
uide
Do not use a metal ladder when installing
your antenna
Keep away from catenary and high voltage
lines.
If an accident or emergency occurs with
the power lines, call for qualified
emergency help immediately.
145.00
115.00
1907-2-29-RFAO5NF2W3GG-1.0
Outdoor Omnidirectional Antenna
Non GPS Model
145.00
115.00
22.00
46.50 46.50
Antenna Cable
Antenna Cable
Mounting Instruction
Outdoor
Indoor
Outdoor
Mounting surface
Max 0.15mm
Indoor
The four screw enclosures are
suggested to be sealed by silicone.
Version 1.0
GPS Model
145.00
115.00
22.00
46.50 46.50
Antenna Cable
Antenna Cable
GPS Cable
Plan your installation procedure carefully
and completely before begin.
Mount antenna at highest position on a flat
roof without any obstacles within a radius of
approximately 1 meter or more.
Clear the area where the antenna is
mounted from paint, corrosion or anodized
layer.
Clear this area from any dust, brake dust,
cutting chip and oil.
Mounting surface must be cleaned before
installation
Always make sure the screws are tightened.
Use a hex-head screw M10 plus the enclosed
sealing washer.
PRINTED ON RECYCLED PAPER