If the product is installed correctly and used to its intended purpose, it conforms to all applicable CE standards at its date of manufacture. The AERA AZURE WHEEL ventilation units in this series are compliant with Eco-Design 2018. 1.4 Storage When storing for a prolonged time the following steps are to be taken to avoid damaging influences: Protection by dry, air- dustproof packing.
The AZURE WHEEL units are equipped with rotary heat exchangers. Through this procedure more than 80 % of the extract air heat is transferred to the external air. The supply air is led by the duct system to the primary (supply air needing) areas. The used air is extracted from the secondary areas (like e.g.
AZURE WHEEL compact devices are suitable for ceiling mounting thanks to the hanging apparatuses found on. Due to noise level which change according to working conditions, it is recommended to install the AZURE WHEEL units in the different rooms. Assembly should take place in such a way to enable preferably short ventilation ducts and their trouble-free connection to the unit.
5. The assembly of the AZURE WHEEL compact unit must only take place in rooms that are free of frost, as there is a danger of freezing. The room temperature must not fall below +5 °C 6.
Users should contact the AERA company for faults detected during operation or maintenance. If you have problems and need to get a service, please contact the following address.