GTRACING GT890M Assembly Instructions

PRODUCT MANUAL
gtracing.com
3
Bluetooth Transmitter
1
�� ��
2 Bluetooth Speakers
1
2
3 Recharge Cable
4
4 Speaker Extension Cable
��

Connecting to smartphones and other devices:

1.Charge the Bluetooth transmitter with the charging cable for 3-4 hours. The LED
indicator will be red while charging and turns blue when fully charged.
2.Turn on the Bluetooth transmitter. The LED indicator glows blue and a voice
prompt says,"The Bluetooth device is ready to pair".
3.Activate the Bluetooth function on your phone and search for wireless devices.
Pair your phone to "GTRACING".
4.Once the pairing is successful you will hear a voice prompt,"Pairing complete".
5.If the connection is disconnected you will hear a voice prompt, "The Bluetooth
device is disconnected", and the device will be ready to pair again.
6.The Bluetooth transmitter will automatically turn off after 10 minutes when no
connection, or 30 minutes when music stops.

TECHNIQUE SPECIFICATION

Power Input Charging Time
USB 5V
Voltage Working Time
3.7V
Battery Capacity Wireless Streaming Range Distance
1200mAh
Watt-hour Support Mobile System
2.22Wh
CAUTION:
1.Heat
The speaker should be situated away from heat sources such as radiators, heat registers,
stoves,and otherproducts (including amplifiers) that produce heat.
2.Water And Moisture
Do not use the speakers near water—for example, near a bath tub, wash bowl,kitchen sink,
or laundry tub,in a wet basement, and the like.
3.Cleaning
Do not use any type of furniture wax, benzene, insecticides liquid or aerosol cleaners. Use
a damp cloth for cleaning.
For more information, please visit our website: gtracing.com.
3-4 Hours
5-6 Hours
5m
Android / ios