Download Print this page

Advertisement

Quick Links

®
SW- RKE LAND ROVER
L0 (SDD/SBB)
CODE: D431408XA - VERS. 2.0
GB

Advertisement

loading
Need help?

Need help?

Do you have a question about the SW-RKE LAND ROVER L0 and is the answer not in the manual?

Questions and answers

Summary of Contents for Silca SW-RKE LAND ROVER L0

  • Page 1 ® SW- RKE LAND ROVER L0 (SDD/SBB) CODE: D431408XA - VERS. 2.0...
  • Page 2 INDEX ® 1 FUNCTIONS MENU RKE LAND ROVER ............. 3 ® IMMOBILIZER LAND ROVER (ROUTINE 13)........3 ® IMMOBILIZER LAND ROVER (ROUTINE 12)........7...
  • Page 3 ® SW- RKE LAND ROVER L0 (SDD/SBB) ® FUNCTIONS MENU RKE LAND ROVER ® IMMOBILIZER LAND ROVER (ROUTINE 13) Model Year Year to Cable Pos. from N° Conn. DEFENDER 1998 2000 ORIGINAL DISCOVERY 1996 2000 ORIGINAL 2000 2000 ORIGINAL The functions on these vehicles are: Addition of new remote controls;...
  • Page 4: General Information

    DIAGNOSIS CONNECTOR POSITIONS GENERAL INFORMATION In order to enable or disable the motor immobilizer these systems use remote controls and transponder keys. When the vehicle is locked by remote control the immobilizer is automatically activated, vice versa to disactivate the motor immobilizer, open the vehicle using a remote control and insert a coded transponder key into the ignition block.
  • Page 5 Now it will be possible to use the key to enter the numerical value of the four digits in the EKA code, as shown below: 2) Enter the FIRST digit in the code. If the first digit is 5, turn the key five times to take it to the “UNLOCK” position.
  • Page 6 PROGRAMME RKE This function is used to programme / delete remote controls. Every time programming is carried out all the old and new remote controls to be used on the vehicle must be reprogrammed. Remote controls that are not programmed during this operation will not work. To activate the function, select “PROGRAMME RKE”...
  • Page 7 ® IMMOBILIZER LAND ROVER (ROUTINE 12) Model Year Year to Cable Pos. from N° Conn. FREELANDER 1998 2003 ORIGINAL FREELANDER 2003 ORIGINAL The functions on these vehicles are: Addition of new remote controls; Deletion of remote controls. To use these functions the following are required: SWITCH ADAPTER OBD II CABLE [00] ALL RKE...
  • Page 8 DIAGNOSIS CONNECTOR POSITIONS GENERAL INFORMATION In order to enable or disable the motor immobilizer these systems use remote controls and transponder keys. When the vehicle is locked by remote control the immobilizer is automatically activated, vice versa to disactivate the motor immobilizer, open the vehicle using a remote control and insert a coded transponder key into the ignition block.
  • Page 9 Now it will be possible to use the key to enter the numerical value of the four digits in the EKA code, as shown below: 2) Enter the FIRST digit in the code. If the first digit is 15, turn the key 15 times to take it to the “UNLOCK” position.
  • Page 10 PROGRAMME RKE This function is used to programme / delete remote controls. Every time programming is carried out all the old and new remote controls to be used on the vehicle must be reprogrammed. Remote controls that are not programmed during this operation will not work. To activate the function, select “PROGRAMME RKE”...
  • Page 11 E-mail: info@silca.de In France SILCA S.A. 78440 PORCHEVILLE Tel. 01 30983500 Fax 01 30983501 E-mail: info@silca.fr In Spain SILCA KEY SYSTEMS S.A. C/Santander 73A BARCELONA - SPAIN Tel. 0034 934981400 Fax 0034 932788004 E-mail: silca@silca.es Members of the Kaba Group...