WALKER MANUAL - AIRON PLUS Contents 1.- Important 2.- Icons used on the label and in the manual 3.- Product use 4.- Product description 5.- Warnings and safety 6.- Assembly and use 7.- Technical Specifications 8.- Care and maintenance 9.- Recycling the product 10.- Storing the product...
2.- Icons used on the label and in the manual Manufacturer details Date of manufacture Medical Device Observe safety instructions Maximum user weight in kg Declaration of Conformity Caution, danger of entrapment Check the user manual Product recycling information Recycling centre Product serial number Product batch number Product reference or code...
Do not use the walker on stairs or escalators. Use only original Forta brand accessories and parts. Do not use the walker to walk backwards, in the opposite direction to the direction you are facing.
All wheels and ferrules must be in contact with the ground at all times. Do not use the walker to mount curbs or sidewalks. Do not use the product on wet, icy or snowy inclines. If any part is damaged, broken or worn, contact your distributor for a replacement. 6.- Assembly and use To unfold the walker, follow the instructions below: 1.
HEIGHT LENGTH WIDTH FOLDED LENGTH 850 - 910mm 560mm 560mm 200mm SEAT MEASUREMENTS HEIGHT TO SEAT FRONT REAR DIAM. REAR WHEELS DIAM. 400x260mm 540mm 150mm 75mm INSIDE WIDTH WEIGHT MAXIMUM LOAD 540mm 4,000kg 110kg 8.- Care and maintenance Failure to care for and maintain the product in perfect condition may lead to the risk of an accident.
Page 6
Negligent handling or maintenance or use of unsuitable parts. Repairs or modifications carried out in non-official workshops. Forta will have no liability for any harm or loss suffered by the user or any third party as a result of any modification to or alteration of any product.
13.- Tests and trials carried out FORTA products comply with Annex IV to MDR (EU) 2017/745, are CE marked and have been designed and tested in accordance with UNE-EN ISO 11199-2:2021. Forta is obliged to certify compliance by its products with a number of essential requirements. There is a standard that specifies the inspection and testing methods to show compliance of the products with those requirements.
Need help?
Do you have a question about the AIRON PLUS and is the answer not in the manual?
Questions and answers