Honda CB350RS II Manual page 90

Tyre Puncture Removing Wheels
u
6. Remove the brake caliper bracket, rear
wheel and side collars.
Support the brake caliper assembly so
u
that it doesn't hang from the brake
hose. Do not twist the brake hose.
Avoid getting grease, oil, or dirt on the
u
disc or pad surfaces.
Do not push the brake pedal while the
u
brake caliper is removed.
Installation
1. To install the rear wheel, reverse the
removal procedure.
Take care to prevent the brake caliper
u
from scratching the wheel during
installation.
88
NOTICE
When installing a wheel or caliper into original position,
carefully fit the brake disc between the pads to avoid
scratching them.
2. Make sure that the slot on the brake
caliper bracket is positioned in the lug on
the swingarm.
Brake caliper bracket
Lug
Swingarm
Slot