HARPER FIRE SURROUND T34597 If the glass will be in direct sunlight, ensure that drops of liquid etc are removed as they can focus the sun's light and cause damage to your furnishings. Sunlight reflecting from the glass surface can reflect onto other surfaces in your home, so if you have items likely to be affected by this, please ensure you position them accordingly, For self-assembled products, please periodically check all...
Page 5
HARPER FIRE SURROUND T34597 12X34MM 7X19MM T34597-2022-V1...
Page 6
HARPER FIRE SURROUND T34597 Place the fire surround on soft material for assembly to avoid any scratch or damage. Packing protection board Loosen the screws remove the packing protection board T34597-2022-V1...
Page 7
HARPER FIRE SURROUND T34597 Place the fire surround on soft material for assembly to avoid any scratch or damage. 65x25MM 12x34MM 16x1MM 13x2MM T34597-2022-V1...
Page 8
HARPER FIRE SURROUND T34597 7x19MM T34597-2022-V1...
Page 9
HARPER FIRE SURROUND T34597 If your floor is not level, the feet on the unit should be adjusted to prevent it from rocking. Place the unit in its final position and unscrew any feet that are not in full contact with the floor. The unit should then be checked for level in left-right and front-back directions with a spirit level and further adjustments made as required.
Page 10
HARPER FIRE SURROUND T34597 Please use the template provided to mark on the wall the position of the fixings. Drill two holes and insert an appropriate wall Use a spirit level to check that the fixings are level. plug into each hole. SPIRIT LEVEL Warning:Always ensure intended...
Page 11
HARPER FIRE SURROUND T34597 H100xW116xD32.5cm T34597-2022-V1...
Need help?
Do you have a question about the HARPER T34597 and is the answer not in the manual?
Questions and answers