Related Manuals for Shark Lift-Away Garment Pro GS400
Summary of Contents for Shark Lift-Away Garment Pro GS400
- Page 1 Lift-Away Garment Pro f a b r i c s t e a m e r User’s Guide GS400 www.sharkclean.com GS400_11_IB_E_120111_1.indd 1 12-01-11 9:46 AM...
- Page 2 IMPORTANT SAFETY INSTRUCTIONS For Household Use Only 1. USE THE SYSTEM ONLY FOR ITS WHEN USING YOUR SHARK ® INTENDED USE AS DESCRIBED IN THIS LIFT-AWAY GARMENT PRO FABRIC MANUAL. STEAMER, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, 2. ONLY USE WATER. To extend the life of your...
- Page 3 h. DO NOT pull or carry by power cord, use 12. The fabric steamer can be used in a vertical or horizontal motion. NEVER hold the steam head power cord as a handle, close a door on the down while at rest. power cord, or pull the power cord around sharp corners or edges.
- Page 4 The Lift-Away Garment Pro Fabric Steamer provides you the convenience of removing wrinkles right on the hangers; and at the same time press the garments to get a completely finished look. The Shark powerful steam technology penetrates fibers, renews and freshens fabrics. The exclusive heated ®...
- Page 5 Quick Start Guide fig. 3 fig. 2 fig. 4 ASSEMBLY Set the base on the floor and insert the telescopic pole section 3 Place the portable steamer on (A) into the opening in the the base. Make sure that it sits base.
- Page 6 Quick Start Guide - cont. PRESS fig. 7 fig. 6 fig. 8 fig. 9 Portable Mode FILLING THE WATER TANK USING THE STEAMER Stand Mode Remove the steamer from the Make sure the power switch is base by lifting it up. OFF “0”...
- Page 7 CONTENTS Thank you Quick Start Guide for purchasing Assembly the Shark ® Using your Fabric Steamer Lift-Away Maintenance Garment Pro Troubleshooting Guide Fabric Steamer Warranty and Registration This manual covers model number: GS400 11 TECHNICAL SPECIFICATIONS Voltage: 120V., 60Hz. Power: 1500 Watts Water Capacity: 1100 ml (37 oz.)
- Page 8 Getting Started First things first, you need to know what’s in the box you just opened: Fabric Steamer Steam hose/steam nozzle with steam bonnet (Bonnet is removable) YOUR FABRIC STEAMER FEATURES Telescoping Garment Pole Steam Nozzle with Wrinkle Steam Hose Power Cord Steam Nozzle Cradle with Eraser ™...
- Page 9 Assembly fig. 2 fig. 1 fig. 3 ASSEMBLY 3 Place the portable steamer on Set the base on the floor and the base. Make sure that it sits insert the telescopic pole section (A) into the opening in the flat. (fig. 2) fig.
- Page 10 This bonnet should only be Fabric Recommendations: steamers 100% before you buy removed for washing by hand, Heavy fabrics, cotton, wool, them, so you get a quality Shark ® canvas, denim. if necessary (see page 12 for Steam product. care instructions).
- Page 11 CAUTION: The Wrinkle Eraser ™ is hot as long as the steam hose power cord (white) is plugged into the steamer receptacle and the unit is turned on. CAUTION: Do not hold the unit in a fixed position on delicate fabrics and upholstered items. CAUTION: The Wrinkle Eraser is hot.
- Page 12 Care of Your Lift-Away Garment Pro Fabric Steamer Cleaning & storing 6 Hang the bristle brush frame Care & use of the small steam and the upholstery/delicate bonnet 1 Turn the fabric steamer off fabric frames on either side of 8 The steam bonnet helps filter “O”.
- Page 13 Troubleshooting Guide PROBLEM SUGGESTED SOLUTIONS Make sure that the main power cord (gray) for the steamer is plugged into the electrical outlet and the steam hose power cord (white) for the Wrinkle Eraser ™ is plugged into the steamer receptacle. Turn the steamer to the On “I” position. Verify that the blue power light on the steam nozzle is lit.
- Page 14 Replacement Parts Ordering replacement parts: To order additional parts and accessories, feel free to contact us at www.sharkclean.com or call 1-800-798-7398. PART PART NO. Small Steam Bonnet XBN400 Upholstery/Delicate 110GSO Fabric Frame Delicate Fabric/ XPD400 Upholstery Steam Bonnet Bristle Brush 109GSO TOLL FREE: 1-800-798-7398 GS400_11_IB_E_120111_1.indd 14...
- Page 15 Product Registration Please visit www.sharkclean.com or call 1-800-798-7398 to register your new Shark product within ten (10) ® days of purchase. You will be asked to provide the store name, date of purchase and model number along with your name and address.
- Page 16 Euro-Pro Operating LLC Newton, MA 02459 CAN: Ville St-Laurent, QC H4S 1A7 English: 1-800-798-7398 www.sharkclean.com Copyright © 2011 Euro-Pro Operating LLC Printed in China Illustrations may differ from actual product. GS400.E.120111.1 GS400_11_IB_E_120111_1.indd 16 12-01-11 9:46 AM...