Table of Contents
Advertisement
Quick Links
SWL-15XX-MC User's Manual
Caution: The user must read this manual before operating the Scanning Wavelength
Laser (SWL) module. Operations other than those described in this manual
may result in personal injury and damage to the module.
Note that any attempt to open or fix the equipment without prior approval by
Optilab, LLC voids the warranty.
Ver. 1.2
nd
September 22
, 2021
Advertisement
Table of Contents
Related Manuals for OPTILAB SWL-15 MC Series
Summary of Contents for OPTILAB SWL-15 MC Series
- Page 1 Laser (SWL) module. Operations other than those described in this manual may result in personal injury and damage to the module. Note that any attempt to open or fix the equipment without prior approval by Optilab, LLC voids the warranty. Ver. 1.2 September 22...
- Page 2 Copyright © 2021 by Optilab, LLC. All rights reserved. This document is copyrighted property of Optilab, LLC. It may not be used in whole or in part for manufacture, sale, or design of items without the written permission of Optilab, LLC.
-
Page 3: Table Of Contents
EMOTE ONTROL 3. TROUBLESHOOTING 4. SERVICE AND SUPPORT 4.1 W ARRANTY 4.2 S ERVICE AND ALIBRATION 4.3 C ARE OF IBER OPTIC ONNECTORS Optilab, LLC 600 E. Camelback Road, Phoenix, AZ 85012 Phone: (602) 343-1496, Fax: (602) 343-1489, Email: sales@oequest.com... -
Page 4: General Information
SWL-15XX-MC User’s Manual Page 1 of 13 1. General Information 1.1 Introduction This manual contains information on the installation and operation of the Optilab SWL-15XX-MC module unit. 1.2 Product Overview The Optilab SWL-15XX-MC is a high frequency, broad band tunable laser module, designed for general laboratory and industry applications. -
Page 5: Operation
Notify Optilab, LLC promptly if any notable damage is found. 2.3 Function Diagram The function diagram of the SWL-15XX-MC module is shown in the figure below. -
Page 6: Panel Diagrams And Controls
PC. Refer to section 2.6 for ONNECTOR pinout information. USB F This port provides USB connection for control/monitoring EMALE from a PC. ONNECTOR Optilab, LLC 600 E. Camelback Road, Phoenix, AZ 85012 Phone: (602) 343-1496, Fax: (602) 343-1489, Email: sales@oequest.com... - Page 7 The OLED display shows the optical settings and OLED D wavelength tuning parameters of the SWL-155XX-MC ISPLAY module. Refer to section 2.5. Optilab, LLC 600 E. Camelback Road, Phoenix, AZ 85012 Phone: (602) 343-1496, Fax: (602) 343-1489, Email: sales@oequest.com...
-
Page 8: Operation Instructions
Knob to change the number of the underlined digit, press the Knob to select the digit or exit the edit. Knob OLED display Optilab, LLC 600 E. Camelback Road, Phoenix, AZ 85012 Phone: (602) 343-1496, Fax: (602) 343-1489, Email: sales@oequest.com... - Page 9 50 kHz, and 100 kHz. Note: The scanning frequency can be set continuously within 1Hz~100 kHz if the module is operated in remote control mode, refer to section 2.6). Optilab, LLC 600 E. Camelback Road, Phoenix, AZ 85012 Phone: (602) 343-1496, Fax: (602) 343-1489, Email: sales@oequest.com...
- Page 10 SWL-15XX-MC supports up to 99.99 kHz scanning frequency when working in the external trigger mode. The minimum scanning duration is PW=0.005 Optilab, LLC 600 E. Camelback Road, Phoenix, AZ 85012 Phone: (602) 343-1496, Fax: (602) 343-1489, Email: sales@oequest.com...
-
Page 11: Remote Control (Optional)
15XX-MC should be recognized as COM Port device. If the SWL-15XX-MC does not appear as a COM Port device, you may need to install the necessary RS485 driver first. Optilab, LLC 600 E. Camelback Road, Phoenix, AZ 85012 Phone: (602) 343-1496, Fax: (602) 343-1489, Email: sales@oequest.com... - Page 12 DC Voltage. set the scanning 1: Wavelength scanning mode to be Internal via Internal Trigger. Trigger mode. 2: Wavelength scanning via External Trigger. Optilab, LLC 600 E. Camelback Road, Phoenix, AZ 85012 Phone: (602) 343-1496, Fax: (602) 343-1489, Email: sales@oequest.com...
- Page 13 SETT Successful between 412 and 612. set the TEC The corresponding TEC temperature to be temperature is between 25.0 °C 35°C and 15°C. Optilab, LLC 600 E. Camelback Road, Phoenix, AZ 85012 Phone: (602) 343-1496, Fax: (602) 343-1489, Email: sales@oequest.com...
-
Page 14: Troubleshooting
C: Optical output connector damaged. S: Measure optical output power with power meter and compare with readout on Main Display. Return to Optilab for repair if the difference is high (>4 dB) and cannot be corrected by cleaning or replacing the optical connectors. Always apply dust cover plugs to unused optical receptacles to prevent the damage of internal optical connectors. -
Page 15: Service And Support
4. Service and Support 4.1 Warranty Optilab, LLC guarantees its SWL-15XX-MC module to be free of defects for 1 year from the date of shipment. The guarantee does not cover any damages resulting from the misuse or improper handling of the equipment, or any incidental or consequential loss. -
Page 16: Care Of Fiber-Optic Connectors
5. Visually inspect the end face of the connector with an optical microscope to verify cleanliness. Clean end-face as needed. Optilab, LLC 600 E. Camelback Road, Phoenix, AZ 85012 Phone: (602) 343-1496, Fax: (602) 343-1489, Email: sales@oequest.com...