Advertisement
high-brightness working condition for a long time, so as not to affect
the life of the film viewer.
Do not cover the observation window with any covers, or the surface
heat will be conducted to the coverings. This is a physical property
that cannot be avoided. The heat will accumulate and not be
dissipated, and the temperature will get higher and higher for a long
time. Being in a high temperature state will affect the service life of the
instrument
Standard configuration
1
Main unit
1pc
3
Power cable
1pc
5
Quality Certificate
1pc
7
Packing List
1pc
Optional accessories
1: Wireless foot switch 2: Light barrier
Troubleshooting 1:
No matter how you turn the dimming knob, the viewing light is very
dim.
Solution:
Check whether the switch is in manual mode. If it is at the pedal
position, it means that you are currently in the pedal mode. At this
time, the film viewer is in the lowest brightness display state. When
you step on the pedal switch, the maximum point will be activated
Bright, and the brightness can be adjusted by the dimming knob.
User's Manual
2
Wired foot switch
1pc
4
Instruction manual
1pc
6
Warranty card
1pc
8
Light barrier (Except
1pc
for FM1000)
5
Troubleshooting 2:
In the foot pedal mode, press and hold the foot switch, the brightness
of the film viewer does not change.
Solution:
Check whether the film viewer is at the lowest brightness, and adjust
the brightness steplessly through the brightness adjustment knob to
achieve the brightness required for the viewing.
Troubleshooting 3;
Plug in the power and press the power switch, the viewing light will
not be on or the brightness will not change.
Solution:
1. If the brightness does not change, check the position of the switch
and toggle it.
2. If the film viewer does not light up, please check the fuse under the
power cord plug on the back panel, and remember to power off!
If it still does not light up, do not disassemble by yourself.
Please contact our customer service in time to troubleshoot the
problem.
6
Advertisement
