Master equipment TP7001 17 Quick Start Manual

TP7001 17 Electric Grooming Table
• Lifts up to 220 lbs
• 43 1/4"L x 23 1/2"W x 1" thick tabletop
• Height adjusts from 15" to 38 1/2"
• X-style frame with wide H-style base for extra stability
• Unique remote control lift for easy height adjustments
• Includes two grooming arms
Parts List
Overhead Grooming Arm
A) Overhead Bar (1)
B) Support Bar (2)
C) Arm Support Base (2)
D) Connectors (2)
E) Grooming Loop (2)
Standard Grooming Arm
F) Grooming Arm (1)
C) Arm Support Base (1)
E) Grooming Loop (1)
G) Screws (9)
H) Table
I) Small Washers (8)
J) Large Washers (8)
K) Allen Wrench (1)
Instructions:
SAVE THESE INSTRUCTIONS • IMPORTANT SAFEGUARDS Basic safety instructions should be followed when using electrical appliances,
including the following:
READ ALL INSTRUCTIONS BEFORE USING. DESIGNED FOR ANIMAL USE ONLY.
OPERATING INSTRUCTIONS:
This table is designed for use with standard 120V outlet. This grooming table also has a polarized plug (one blade is wider than the other). As an
important safety feature, this plug is intended to t into a polarized outlet only one way. If the plug does not t fully in the outlet, reverse the plug. If it
still does not t, contact a quali ed electrician to install the proper outlet. Do not attempt to modify the plug in any way. This table is also designed
with an automatic shut-o . Motor, transformer, and cord are all UL Approved. We recommend that this table be used with a surge protector at all times.
1. Table is fully assembled. Before use, make sure table is level by turning leveling feet under each base leg.
Plug cord into any standard 110/120V wall outlet.
2. To reduce strain and unnecessary lifting of large animals, it is recommended to lower the
table to minimum height and let animal step up onto table before positioning table to
desired height for grooming.
3. Once animal is positioned on table, place the grooming loop that is attached to grooming
arm around animal's neck and adjust to t comfortably.
4. Loosen the leveling screws to move the table as needed or tighten the leveling screws
to make the grooming table stable.