Download Print this page

ARS KEVLAR EATER Instruction Manual

Hide thumbs

KEVLAR EATER

526-H

INSTRUCTION MANUAL FOR THE "KEVLAR EATER"

Please read through the instruction manual

carefully prior to using the KEVLAR EATER

Thank you very much for purchasing KEVLAR EATER

https://www.arscorporation.jp

Established In 1876

476-3 Handaiji-Cho, Naka-Ku, Sakai City,

599-8267,Osaka, Japan

Table of Contents

Need help?

Do you have a question about the KEVLAR EATER and is the answer not in the manual?

Questions and answers

Summary of Contents for ARS KEVLAR EATER

Page 1 KEVLAR EATER 526-H INSTRUCTION MANUAL FOR THE "KEVLAR EATER" Please read through the instruction manual carefully prior to using the KEVLAR EATER Thank you very much for purchasing KEVLAR EATER https://www.arscorporation.jp Established In 1876 476-3 Handaiji-Cho, Naka-Ku, Sakai City, 599-8267,Osaka, Japan...
Page 2 526H Kevlar Cutting Load Durability KEVLAR EATER-526-H General Information Grip Color Black Cutting features The KEVLAR EATER will assure excellent durability against aramid-base thread (fabric, tape), high-molecular film and other general fabrics. The KEVLAR EATER the cutting blades will securely...
Page 3 100% aramid fabric 100 times that of ordinary steel the KEVLAR EATER did not shears. show any decreased in cutting efficiency as shown in the figure on the left, even when it was...
Page 4 "Micro-Serration" which is allowing for excellent cutting unique to ARS. The finely efficiency to be achieved. Adjustments of dial nut (utility model pending) To adjust the dial nut, open the efficiency, or a reduction in...
Page 5 Precautions on Use The KEVLAR EATER has been designed to be resistant against long-time use, however, bear in mind that the wrong usage may not assure it of the best performance. It is advised to pay attention to the following points: 1.
Page 6 Lubrication (accessory) To allow the KEVLAR EATER to last for a long time, it is advised to perform regular maintenance by using lubricant oil. • Be sure to apply a drop of oil to the support points prior to using the drops of oil KEVLAR EATER.

This manual is also suitable for:

526-h