Stada Britannia Crono APO-go III Programming Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Crono

APO-go III Pump

Programming Guide for APO-go

INFUSION

This guide is intended to be read alongside the

advice given in the Crono

APO-go III Pump user manual.

Table of Contents

Need help?

Do you have a question about the Britannia Crono APO-go III and is the answer not in the manual?

Questions and answers

Summary of Contents for Stada Britannia Crono APO-go III

Page 1 Crono APO-go III Pump ® Programming Guide for APO-go INFUSION ® This guide is intended to be read alongside the advice given in the Crono ® APO-go III Pump user manual.
Page 2 Contents Introduction The following guide provides guidance to help you when The Crono ® APO-go III Pump has two available programming Locking/unlocking the Crono APO-go III Pump ® programming the Crono APO-go III Pump, including helpful modes: APo1 and APo3. The APo1 mode is used for a single flow ®...
Page 3 Locking/unlocking the Crono APO-go III Pump Setting the bolus/priming dose and syringe volume ® Locking/unlocking APo1 MODE APo3 MODE This task requires the pressing of two buttons simultaneously Display screen L1 = locked. Padlock symbol on display Pump set to and unlocked (L0) L0 = unlocked.
Page 4 Switching the Crono APO-go III Pump on Dosage to flow rate conversion table ® 20 ml syringe 20 ml syringe with spacer Flow rate value 20 ml setting 10 ml setting Pump set to to set on pump (i.e. 100 mg APO-go (i.e.
Page 5 Step 5: Setting the flow rate Programming variable flow rate in APo3 mode The screen will show with a number next to it. This is your first flow rate. Step 1: Entering set up mode 0.60 APo3 MODE Referring to your flow rate record set the flow rate for using buttons.
Page 6 Priming the line in APo1 mode Pausing the infusion APo1 MODE PAUSING THE INFUSION While the infusion is running press and hold – the display Pump set to ‘ON’ will now show S oP Press and hold until you hear a long beep – then release The pump can be restarted by pressing and holding Display will show the bolus dose being infused into the line, with flashing.
Page 7 Error functions Error functions for Crono APO-go III Pump in APo1 mode only ® Error Message Description Action Unfeasible operation No action required Er 2 Safety system error Press button Er 3 Irregularity of motor circuit Press button Er 4 Obstruction of plunger during retraction Remove obstruction.
Page 8 apomorphine hydrochloride Britannia Pharmaceuticals Limited 200 Longwater Avenue, Green Park, Reading RG2 6GP UK-APOINF-2100072 Date of preparation: May 2021...