Motorola Rambler User Manual page 12

into the phone's headset jack (see page 2) and set the
phone to operate in one of three TTY modes.
Use a TSB-121 compliant cable (provided by the TTY
device manufacturer) to connect the TTY device to the
phone.
Set the phone volume to level 4 (middle setting) for
proper operation. If you experience a high number of
incorrect characters, adjust the volume as needed to
minimize errors.
For optimal performance, your phone should be at
least 12 inches (30 centimeters) from the TTY device.
Placing the phone too close to the device may cause
high error rates.
When you set your phone to a TTY mode, it operates
in that mode whenever the TTY device is connected.
Settings
Find it: >
Scroll to one of these options and press
option
Voice
Set to standard voice mode.
TTY
Transmit and receive TTY
characters.
VCO
Receive TTY characters but
transmit by speaking into phone
microphone.
10 Basics
Call TTY Setup
> >
.
option
HCO
Transmit TTY characters but receive
by listening to phone earpiece.
When your phone is in TTY mode, during an active call
your phone displays the international TTY mode, the
international TTY symbol, and the mode setting.
Airplane mode
Use airplane mode to turn off your phone's calling
features in locations where wireless phone use is
prohibited. You cannot make or receive calls or use
Bluetooth® wireless connections in airplane mode,
but you can use your phone's other non-calling
features.
Note: Consult airline staff before you use airplane
mode in flight. Turn off your phone whenever
instructed to do so by airline staff.
Settings
Find it: >
See your phone number
Settings
Find it: >
Your phone number is listed at the top of the screen.
Tip: Want to see your phone number while you're on a
Options Phone Info
call? Press >
Phone Airplane Mode
> > >
Phone Info My Number
> >
My Number
> .
On Off
or