Summary of Contents for Pedigree Technologies OneView LMU 2630
Page 1
(LMU 2630/LMU 2720) Document ID: IM-MM-2630 Last Updated: May 02, 2019 Pedigree Technologies recommends using a professional installer for optimal results. Please let your Pedigree Technologies representative suggest a provider if you need help with your hardware installations. PedigreeTechnologies.com | Support: (701)-499-0022...
Mobile Equipment Manager (LMU 2630/ LMU 2720) Prerequisites Required Information [needed for final activation of hardware - see last page] • Name of asset (ex: Trailer #20) • Detailed information about the asset (year, make, model, VIN, license plate, etc.) •...
BLACK and WHITE wires in a Mobile Equipment Manager installation would be directly at the factory hour-meter. This will provide the most accurate monitoring of engine runtime. Contact Pedigree Technologies if you have Black Wire questions about alternate connection points.
Mobile Equipment Manager (LMU 2630/ LMU 2720) Antenna Connection • Antenna clearly marked “THIS SIDE FACES THE SKY” • The antenna should be placed with a clear view to the sky, with no metal obstructions above or overhead. • Mounting the antenna to the bottom side of a plastic dash panel is acceptable, but a window location without obstruction to the driver is preferred.
Page 5
LMU. STEP THREE Once the lights are solid, call your Pedigree Technologies Installation Support representative to confirm and finalize the installation. Install Confirmation: 701-499-0022 You will be prompted for the following information during the set up process •...