GPED MA10 - Wireless Earbuds Manual

Notice before using

1. 
   
   
   
2. 
   
   (Optional, please ignore if no stickers here)

Wearing method

Gently slide into ears, the earbuds tail align with the mouth

Adjust the earbuds to where it doesn't move while wobbling head

Main user interface

1. Charging point
2. Touch button
3. .Microphone
4. Charging USB Port
5. Status LED

Start Here

1. Open Charging Dock case, take out the earbuds
   
   
2. Auto power on & pairing
   
   After taking out earbuds, they will automatically power on and pair to each other
   (Voice Notice: Power on --->TWS Connected--->Pairing)

3. Pairing with cellphone
   
   Open cellphone bluetooth and set it as Open detection, when "M10" appears in available devices, press to connect. The LED flash in Blue continuously.
   (Voice Notice: Connected)
   
4. Power off
   
   The earbuds will power off after put them back to the charging dock.
   (Voice Notice: Power off)

Charging

1. The LED flashes in Red and there is a Voice Notice when the Battery Power Low.
2. Without external power supply, the LED is on in white while charging and will be off after fully charged.
3. With external power supply, the LED flash in blue while charging and will be on in blue after fully charged.
4. It takes about 1.5h to fully charge the earbuds and charging dock batteries.

More functions

1. Touch the function button once to answer calls, touch Funtion Button twice to reject calls.
2. When playing music, To pause, please touch the function button once; To play the previous song, please touch and hold 2s for left earbud function button. To play next song, please touch and hold 2s for right earbud function button;
3. To increase volume, please touch the function button of left earbud twice;
   To decrease volume, please touch function button of the right earbud twice;
   To activate siri, please touch function button three times.

Manual pairing

1stly: make sure the earbuds don't connect any bluetooth devices.

2ndly: put two earbuds close within 10cm and press & hold two function buttons for 2s to power on both earbuds.

3rdly: press either function button twice, auto pairing completed when one LED flashes between red & blue, the other one is off.

4thly: press & hold either function button for 5s, two earbuds turn off at the same time, manual pairing completed.

Basic Parameter

Product Name: MA10

Charging time: 1.5 hours

Music Time: 4 hours

Battery Type: Polymer Li-Ion Battery

Earbud weight: 4g+4g

Operation range: 10m

Call time: 5 hours

Charging Input: 5V300mA

Important Notice

• Please make sure the product is fully charged before initial use
• Please use the brand adaptor complying safety requirements to charge this product.
• If your cellphone can not find "M10", please double check if your cellphone Bluetooth is at "Equipment visible mode". After initial pairing, the earbuds will be automatically paired for repeat use. If no use for a long time, need to follow up pairing procedures to pair with the cellphone.
• If there is only one earbud has sound while in music mode, please restart the earbuds or re-pair manually.

Questions & Answers

Security warning

• Please use the product in the temperature between 0 C-45 C. When the enviroment temperature is too high or low, it may cause the product malfunction.
• Please keep the product dry, do not contact water or humidity enviroment
• Please do not drop, throw, pull/drag the product to prevent damage.
• Please power off before clean the product.
• Please use the product at proper volume while listenning music or answering call, long time at high volume usage could lead to permanent hearing loss.
• The built in battery is not dismountable, please do not replace by yourself. If it's really necessary, please ask help from authorized service center.
• Please dispose the product according to local law, can not treat it as domestic garbage.
• Without adult supervision, please keep the product out of reach of children, the swallow of small components included may cause asphyxia.

Warranty

• This product is covered under warranty for a period of one year from the date of purchase limited to normal use and maintenance of the machine parts, materials and functions. Problems and failures verified upon fur- ther identification, will be provided free repair and replacement parts.