Advertisement
DeatschWerks
3
VB40a 40amp Voltage Booster Installation Guide
PLEASE READ
: This guide is intended to aid in the installation of our products. It is recommended that
factory manuals or instructions are followed to remove the fuel pump assembly from the vehicle. Instructions
in this guide are generic and are intended to aid in the installation of a Brushless fuel pump controller. The
factory manual should supersede any contradiction.
Note: The Deatschwerks VB40a voltage booster is limited to 40amps. Increased flow results will stop when
total pump(s) amperage hits 40amps.
Below is a picture of some suggested tools that will make the installation process easier.
Advertisement
