RAB GUS- 2FT Instructions

INSTRUCTIONS
GUS INSTALLATION
RAB Lighting is committed to creating high-quality, aff ordable, well-designed and energy-effi cient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We'd love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: marketing@rablighting.com
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
RAB fi xtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding
is required for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A
PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
WARNING: Make certain power is OFF before installing or maintaining xture. No user serviceable parts inside.
Suitable for damp locations.
CEILING MOUNTING
The fi xture is suitable for indoor applications.
Carefully snap out Lens one side at a time from Housing.
1.
Remove Screws (2) from Re ector as shown in Fig.
2.
Squeeze center of Re ector and release from Notches.
3. Pull supply wires from Junction Box (not supplied) through
Center Access Hole of Housing as shown in Fig. 1. Use
appropriate UL rated wire connectors as required by code
to make electrical splices to fi xture leads.
4. Follow appropriate mounting and wiring instructions per
code.
5. Once connections are made push all wires behind the
Re ector.
6. Replace Re ector and secure with Screws (2). Be careful not
to pinch wires. Hook Lens to one side of Housing and snap
Lens into place as shown in Fig. 2.
7. Remove plastic fi lm from Lens.
WARNING: To prevent wiring damage or abrasion, do not
expose wiring to edges of sharp objects.
GUS- 2FT
1.
GUS - 4FT
Fig: 1
Center Access Hole
Knock out for 1/2"
conduit
Notches (4)
Fig: 2
Lens
Housing
Housing
Snap
End Cap (2)
Re ector
Screw (2)
Lens