Sending Contact Information - Motorola BRUTE i686 User Manual

4.
When Ready to Send
to send the information.

Sending Contact Information

You can send contact information by selecting a
Contacts entry.
Contacts entries that contain only addresses cannot be
sent. When Contacts entries are received, they do not
include ring tones or pictures.
To send contact information during a call:
While in a Direct Connect call, press /
1.
Contacts .
Highlight a Contacts entry and press /
2.
Send Via... > Direct Send.
Note:
If the Contacts entry you scrolled to is a Group, you may
be prompted to allow yourself to be a part of the group
being sent. Press
the group.
3.
When Ready to Send
to send the contact information.
To start a call by sending contact information:
1.
From Contacts, highlight or select an entry.
38 3. Making and Answering Calls
appears, press the DC button
>
Yes (left softkey) to become part of
appears, press the DC button
Press /
2.
Note:
If the Contacts entry you scrolled to is a Group, you may
be prompted to allow yourself to be a part of the group
being sent. Press
the group.
3.
Enter a Direct Connect number or press
(left softkey) and select a number from
Recent Calls
4.
When
to send the contact information.
Receiving My Info or Contact Information
When you receive My Info or contact information from
>
another phone, an icon appears on the display.
My Info
3
Contact Information
2
To view the information while still in the Direct Connect call:
Press /
You can also view My Info from other phones on the
Recent Calls list. See "7. Recent Calls" on page 92.
> Send Via... > Direct Send
(left softkey) to become part of
Yes
or .
Memo
appears, press the DC button
Ready To Send
.
> View Contact
.
Browse
,
Contacts