MedNet DT-20B User Manual

Electrical thermometer

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

User's Manual

Electrical Thermometer

Models： DT-20B、DT-20、DT-10B、DT-10

Table of Contents

Need help?

Do you have a question about the DT-20B and is the answer not in the manual?

Questions and answers

Summary of Contents for MedNet DT-20B

Page 1 User’s Manual Electrical Thermometer Models： DT-20B、DT-20、DT-10B、DT-10...
Page 2 1. The Basics This manual contains the instructions necessary to operate the product safely and in accordance with its function and intended use. Observance of this manual is a prerequisite for proper product performance and correct operation and ensures patient and operator safety.
Page 3 results. Do not boil, bite, bend, drop, or disassemble the  thermometer. Do not share the thermometer with more than one person  without disinfection, or it may cause cross-infection. Do not try to sterilize by immersing the thermometer head in ...
Page 4 Do not self-diagnose the measurement results and start  treatment by yourself. Always consult your doctor for evaluation of the results and treatment. Adults required shaving skin before  measuring their temperature. Make sure that the skin that is in contact with the thermometer is flat and wrinkle-free. Do not use the device where flammable gases such as ...
Page 5: Intended Use
2. Introduction Intended Use The product is used to measure body temperature and pulse rate in the home and in the medical sector. 2.2 Contraindications Those who are allergic to stainless steel or PC plastic should not use this product. 2.3 Symbols Symbol Meaning...
Page 6: About The Product
2.4 About the product Product name: Electrical Thermometer Software release version：V1 Product model: Model and Configuration see the table below. DT-10 DT-10B DT-20 DT-20B Function Tempera ● ● ● ● ture Pulse ● ● △ △ rate × ● ×...
Page 7 1. Temperature Key Short press the power on, and drip a sound, long press 3 seconds off; Press to start/stop temperature measurement. 2. Pulse rate Key Short press the power on, and drip a sound, long press 3 seconds off; Press to start/stop pulse rate measurement.
Page 8: Before Measurement
3. Using the thermometer 3.1 Charge the Battery 1. The device has a built-in lithium battery, which can be c harged for repeated use; 2. The user connects one end of the USB cable to the powe r adapter, and inserts the other end into the host USB chargi ng interface for charging.
Page 9 seconds. 3.3 Measurement Please follow the instructions below after starting the machine. Measuring oral temperature 1. With your mouth open, put the temperature measuring head under your tongue. 2. Close your lips gently around the thermometer. 3. Remain motionless, until a drops dripping sound (it takes about 20 seconds), the equilibrium temperature for prediction of the human body, if you want to get more accurate temperature value, should continue to measuring temperature, the thermometer will...
Page 10: After Measurement
3.4 After Measurement 1. When the buzzer emits a beep sound(Beep-short sound) , it indicates that the temperature measurement is finished. The display "°C/℉" stops blinking, and the displayed temperature value is the result of the current body temperature. 2.Turn off the thermometer: press and hold (> 0.5 seconds) to switch the thermometer off.
Page 11: Data Storage
indicator light, data will not be saved, and the voice will prompt the long drop for 3 seconds. Note 3: User's finger was detected touching the pulse probe. Mode switching is not allowed. 3.6 Data storage 1. The host can save a total of 60 sets of data (pulse rate 30 + temperature 30).
Page 12: Time Management
Note: The data cable is a dedicated cable, please purchase additionally. 3.7 Time Management 1. The device supports Real-Time Clock function, so the device Clock will work correctly when the host is powered. 2. Time will be lost after absolute shutdown and then boot up after absolute shutdown.
Page 13: Troubleshooting
5. Trouble Shooting Problem Possible Cause Recommended Action Can not boot Very low battery Please charge according to the instruction The ambient temper Please use within ature exceeds 40℃ working or below 5℃. environment temperature range (5℃-40℃) The monitor Other devices have Turn on the cannot be Bluetooth turned off...
Page 14 is being performed. The device has not Measurements been placed for more should be taken than 30 minutes from before they are left the colder in the measuring environment to the environment for measuring more than 30 environment. minutes. The device has not Measurements been placed for more should be taken...
Page 15: Specifications
7. Specifications Classifications MDR, 2017/745 EC Directive RED, 2014/53/EU ROHS 2.0, 2011/65/EU Degree protection against Type BF electrical shock Environmental Item Operating Storage Temperature 5 to 40°C -20 to 50°C Relative humidity 15% to 85% 15% to 85% (noncondensing) Barometric 700 to 1060 hPa 700 to 1060 hPa Degree of dust &...
Page 16 Temperature measurement Measurement method Direct mode Measurement site Mouth,Axilla,Rectum REFERENCE BODY Mouth,Axilla,Rectum SITE Temperature Unit Celsius(℃）or Fahrenheit(℉） Temperature range 32.0 – 43.9℃（89.6-111.0℉） Less than 35.8℃, ±0.3℃.(Less than 96.4℉, ±0.5℉.) 35.8℃ to less than 37℃,±0.2℃.(96.4℉ to less than 98.0℉,±0.3℉.) 37.0℃ to 39.0℃, ±0.1℃.(98.0℉ to Measurement accuracy 102.0℉, ±0.2℉.) Greater than 39.0℃...
Page 17: Electromagnetic Compatibility
8. Electromagnetic Compatibility The device meets the requirements of EN 60601-1-2. Warnings and Cautionary Advices Using accessories other than those specified in this manual  may result in increased electromagnetic emission or decreased electromagnetic immunity of the equipment. The device or its components should not be used adjacent to ...
Page 18 Guidance and Declaration - Electromagnetic Immunity The device is intended for use in the electromagnetic environment specified below. The customer or the user of the device should assure that it is used in such an environment. Immunity test IEC60601 test Compliance Electromagnetic level...
Page 19 The device is intended for use in the specified electromagnetic environment. The customer or the user of the device should assure that it is used in such an environment as described below. Immunity IEC60601 Complian Electromagnetic environment - guidance test test level ce level Vrms...
Page 20 Recommended separation distances between portable and mobile RF communications equipment and the device The device is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the device can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the monitor as recommended below, according to the maximum output power of the communications equipment.
Page 21 FCC Warnning: FCC ID：2ADXK-7611 Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 22 Shenzhen Viatom Technology Co., Ltd. 4E, 3#, Tingwei industrial Park, No.6 Liufang Road, Block 67 Xin’an Street, Baoan District Shenzhen, China www.viatomtech.com Email:info@viatomtech.com MedNet GmbH Borkstrasse 10, 48163 Muenster, Germany Tel:+49 251 32266-0 Fax:+49 251 32266-22 PN：255-02378-00 Version: A May, 2020...

This manual is also suitable for:

Dt-20 Dt-10b Dt-10