The partly completed machine moreover complies with all requirements of the Electrical Equipment Directive (2006/95/EC) and the Electromagnetic Compatibility Directive (2004/108/EC). Roth & Rau Muegge GmbH – Hochstraße 4-6 – 64385 Reichelsheim Tel.: +496164 9307 0 – Fax: +496164 9307 93 E-mail: info@muegge.de...
Page 7
Address of the person authorized to compile the documentation: see manufacturer's address Reichelsheim, Date Signatory and information regarding the signatory 26.02.10 Klaus Muegge CEO Roth & Rau Muegge GmbH – Hochstraße 4-6 – 64385 Reichelsheim Tel.: +496164 9307 0 – Fax: +496164 9307 93 E-mail: info@muegge.de – Internet: www.muegge.de MH3000S-211CV00008100102.doc...
In order to protect the system parts from corrosion and deposits, Muegge GmbH on principle recommends that the water in closed circuits be treated with a suitable agent (corrosion protection with non-ferrous metal protection and hardness stabilisation).
Responsibility Areas of responsibility of Roth & Rau Muegge GmbH Roth & Rau Muegge GmbH is responsible for the safety of the MH3000S-211CV. This is based on the presupposition that the MH3000S-211CV has not been modified in any way following the final acceptance.
Cover or make inaccessible nearby live parts 3.3.6 Modifications Any modifications require the written consent of the manufacturer. Roth & Rau Muegge GmbH – Hochstraße 4-6 – 64385 Reichelsheim Tel.: +496164 9307 0 – Fax: +496164 9307 93 E-mail: info@muegge.de –...
Safety precautions prior to use Ensure that the MH3000S-211CV is properly installed in the MW Power Supply Cabinets. Roth & Rau Muegge GmbH – Hochstraße 4-6 – 64385 Reichelsheim Tel.: +496164 9307 0 – Fax: +496164 9307 93 E-mail: info@muegge.de...
Q. Water connection for the magnetron unit R. Ventilator S. Loop coupler for power measurement T. Loop coupler for reflexion measurement Roth & Rau Muegge GmbH – Hochstraße 4-6 – 64385 Reichelsheim Tel.: +496164 9307 0 – Fax: +496164 9307 93 E-mail: info@muegge.de –...
Proceed according to the installation plan! Prior to turning on the system, the individual points must be checked once more! Roth & Rau Muegge GmbH – Hochstraße 4-6 – 64385 Reichelsheim Tel.: +496164 9307 0 – Fax: +496164 9307 93 E-mail: info@muegge.de...
This document is intended only for technically qualified personnel who have received training on the MH3000S-211CV. Such training must have been carried out or authorized by Roth & Rau Muegge GmbH. Only trained personnel are able to properly implement the safety precautions contained in this document.
As the MH3000S-211CV is compatible to several MW power supplies which are different in operation, the correct type of operation must be determined from the documentation of the MW power supply. Roth & Rau Muegge GmbH – Hochstraße 4-6 – 64385 Reichelsheim Tel.: +496164 9307 0 – Fax: +496164 9307 93 E-mail: info@muegge.de...
Non-compliance with these safety precautions results in potential hazards for persons and material property. HAZARD Due to microwave leakage radiation HAZARD From electric shock! Roth & Rau Muegge GmbH – Hochstraße 4-6 – 64385 Reichelsheim Tel.: +496164 9307 0 – Fax: +496164 9307 93 E-mail: info@muegge.de – Internet: www.muegge.de MH3000S-211CV00008100102.doc...
Functional check of the safety switch * Not required if cables are laid in a cable duct or cable bridge. Roth & Rau Muegge GmbH – Hochstraße 4-6 – 64385 Reichelsheim Tel.: +496164 9307 0 – Fax: +496164 9307 93 E-mail: info@muegge.de...
B. Coupling unit C. Mounting screws (cylinder screw DIN 912 A2 M5x130) D. Direction of removal of the magnetron unit Roth & Rau Muegge GmbH – Hochstraße 4-6 – 64385 Reichelsheim Tel.: +496164 9307 0 – Fax: +496164 9307 93 E-mail: info@muegge.de...
9. Connect cooling water hoses to the magnetron unit 10. Provide cooling water supply 11. Connect all connecting cables to the magnetron unit Roth & Rau Muegge GmbH – Hochstraße 4-6 – 64385 Reichelsheim Tel.: +496164 9307 0 – Fax: +496164 9307 93 E-mail: info@muegge.de...
C. Antenna (consists of part 1 and part 4) D. Outer tube E. Cylinder support F. Direction of removal of antenna and outer tube Roth & Rau Muegge GmbH – Hochstraße 4-6 – 64385 Reichelsheim Tel.: +496164 9307 0 – Fax: +496164 9307 93 E-mail: info@muegge.de –...
17. Connect the air pipes to the standard cylinder NOTE Make sure not to mix up the air pipes! Roth & Rau Muegge GmbH – Hochstraße 4-6 – 64385 Reichelsheim Tel.: +496164 9307 0 – Fax: +496164 9307 93 E-mail: info@muegge.de...
Page 35
Safety circuit 24VDC Cooling water circuit: : min. 4L Cooling water flow : 20-25°C Cooling water temperature range : Rectus Series 87 (300) Cooling water connector Roth & Rau Muegge GmbH Date 11.03.2011 Technische Daten Doku Hochstraße 4-6 320900793 D-64385 Reichelsheim...
Page 43
Safety circuit 24VDC Cooling water circuit: : min. 4L Cooling water flow : 20-25°C Cooling water temperature range : Rectus Series 87 (300) Cooling water connector Roth & Rau Muegge GmbH Date 14.03.2011 Technische Daten Doku Hochstraße 4-6 1001624 D-64385 Reichelsheim...
Page 45
Summarized parts list : 1430002 - 4000162 25.01.2011 =AUSW+BL/3 Summarized parts list : 4000163 - 1010621 25.01.2011 =AUSW+VER/3 Connection list : - S1 25.01.2011 +Daten/3 =AP+0/1 Roth & Rau Muegge GmbH Date 14.03.2011 contents : =Doku+Daten/1 - Doku Hochstraße 4-6 1001624 D-64385 Reichelsheim Inhalt =AUSW+VER/3...
Page 46
Magnetron unit =Doku+Inhalt/1 Roth & Rau Muegge GmbH Date 14.03.2011 View Hochstraße 4-6 1001624 D-64385 Reichelsheim ME0118P-035AB Appr Page ME0118P-035AB00004400003 Modification Date Name Original Replaced by Replaced by Page...
Page 56
Cooling water circuit: : min. 4L / min Cooling water flow : 20-25°C Cooling water temperature range : Rectus Series 87 (300) Cooling water connector Roth & Rau Muegge GmbH Date 14.03.2011 Technische Daten Doku Hochstraße 4-6 320900793 D-64385 Reichelsheim...
Page 58
Launcher =Doku+Daten/3 Roth & Rau Muegge GmbH Date 14.03.2011 View Hochstraße 4-6 320900793 D-64385 Reichelsheim ME0118P-037AB Appr Page ME0118P-037AB00004400002 Modification Date Name Original Replaced by Replaced by Page...
Page 59
Reflected power connection 1 2 3 4 5 6 7 8 9 ME0118P-037AB Cooling water connector 1/2" Hose connector min. 4L / min / 20-25°C +ST1/1 Roth & Rau Muegge GmbH Date 14.03.2011 Hochstraße 4-6 320900793 D-64385 Reichelsheim ME0118P-037AB Appr...
Page 60
SMA Kabel SMA Kabel 0,195 m 0,32 m 1x0,48 1x0,48 MM1002D-110AB MM1002D-110AB loop detector loop detector Launcher Launcher +0/2 =AUSW+STK/1 Roth & Rau Muegge GmbH Date 14.03.2011 Hochstraße 4-6 320900793 D-64385 Reichelsheim ME0118P-037AB Appr Page ME0118P-037AB00004400002 Modification Date Name Original...
Page 61
Hi-Kabelkonfektionierungs G 1010252 =AP+ST1/1 =AP+ST1-W2 konf. Kabel SMA Stecker / Stecker Kabel Hi-Kabelkonfektionierungs G 1010250 =AP+ST1/1 =AP+ST1/1 +BL/1 Roth & Rau Muegge GmbH Date 14.03.2011 Parts list : 0660134 - 1010250 AUSW Hochstraße 4-6 320900793 D-64385 Reichelsheim ME0118P-037AB Appr Page...
Page 65
Spec No. 8266100 A CONTENTS Page 1/10 Model No. 2M266-M12WJ 1.Application This specifications is applied for CW magnetron model 2M266 which is supplied to Muegge using for microwave oven. 2.Construction of this specifications Item No. Contents Spec. No. Page 1 Cover Sheet ──── ─ Contents 2 8266100 A 1/10 3 Record of Revision 8266100 B 2/10 4 Product Specifications 8266100 C 3/10〜7/10 5 Outline Drawing 8266100 D 8/10 ...
Page 66
Spec No. 8266100 B RECORD OF REVISION Page 2/10 Model No. 2M266-M12WJ Date Spec No. Page Summary 5/14/99 ISSUED 5/14/99 National/Panasonic...
Page 67
Spec No. 8266100 C PRODUCT SPECIFICATIONS Page 3/10 Model No. 2M266-M12WJ This Specifications is based on the General Rules of Inspection for Electron Tubes ED-1101 and the Testing Methods for Continuous Wave Magnetrons ED-1501 set by the Electronic Industries Association of Japan (EIAJ). (Fixed Frequency, Packaged Magnet, Continuous wave Magnetron Description Probe Output) Outline Refer Outline Drawing Net weight Approx. 2.3 Kg Ib Ibm Pi σL Item Ef Ef tk Ebm Tp Tc Storage Absolute ) ...
Page 68
Spec No. 8266100 C PRODUCT SPECIFICATIONS Page 4/10 Model No. 2M266-M12WJ Note ( ) The tube shall be mounted on the output coupler (shown in the attached drawing) or similar one. Ambient temperature is 25℃. Single phase full wave rectifier without filter shall be used for power supply. ( ) Filament voltage should be regulated as shown in Fig.1. at operating. ( ) Apply for half wave doubler power supply. If power supply is different, this figure shall be reviewed. ( ) This figure shall be reviewed, after confirmed load impedance of customer's instrument. The point for measuring anode/Tp and filter case/Tc temperature are shown in the outline drawing. ( ) Figures are specified at 25±1℃ of the magnets' temperature. Measured shall be done within 30 seconds after anode voltage supplied. ( ) No continuous spark occur in the wave-gide. ...
Page 69
Spec No. 8266100 C PRODUCT SPECIFICATIONS Page 5/10 Model No. 2M266-M12WJ Fig.1 Cut back of Filament voltage on operation condition Upper limit Lower limit 1000 Average anode current Ib(mA) Fig.2 Performance Chart 3500 3000 2500 2000 η 1500 1000 Ib(mAdc) 5/14/99 National/Panasonic...
Page 70
Spec No. 8266100 C PRODUCT SPECIFICATIONS Page 6/10 Model No. 2M266-M12WJ Fig.3 Typical Rieke Diagram Anode supply : Single phase full wave Matched load condition rectifier without filer. Peak anode voltage : 5.1 kV ...
Page 71
Spec No. 8266100 C PRODUCT SPECIFICATIONS Page 7/10 Model No. 2M266-M12WJ Fig.4 R.F.coupler Unit:mm(inch) The flange mates withJapanese standaed BRJ-2. 5/14/99 National/Panasonic...
Page 72
Spec No. 8266100 D OUTLINE DRAWING Page 8/10 Model No. 2M266-M12WJ Unit:mm(inch) Note1. Anode temperature measuring point. To be measured at the outlet side of air flow. Note2. Filter case temperature measuring point. Note3. For 1/8 nipples. Hole size are as following dimentions. 5/14/99 National/Panasonic...
Page 73
Spec No. 8266100 E TECHNICAL NOTE Page 9/10 Model No. 2M266-M12WJ TECHNICAL NOTE 1.Preheating and cut back operation Preheating of filament for more than 3 seconds before apply high voltage desirable for long life and minimize transient voltage (surge voltage). Also when applying high voltage, filament voltage should be reduced to proper value of anode current (Ib) refer to Fig.1 of this specifications cut back operation is recommended. 2.Connection of filament terminals The filament terminal of magnetron shall be connected as good as possible electrically and mechanically to protect defect, because poor mechanical contact easily cause poor connections. 3.Handling Magnetron has strong construction in mechanical and thermal because it’s constructed with ceramic and metal. However filament has poor mechanical strength against vibration or shock. Due to particular fact that filament use is made of thoriated-tungsten wire, the surface of which has been specially treated (known as carbonization) in order to ensure good electron emission. Therefore, the user has to pay enough attention to handling. Also magnetron shall be prevented against mechanical vibration of 300〜400 Hz frequency because filament has synclonous mechanical vibration at that frequency. As the magnetron is operated with a high voltage supply to the cathode terminal, it is necessary that hands should be kept away from the terminals of the tube being operated. Microwave leakage from magnetron input (filament terminal) is prevented by filter ...
Page 74
Spec No. 8266100 E TECHNICAL NOTE Page 10/10 Model No. 2M266-M12WJ 4.Load impedance In designing microwave ovens, it is important for the magnetron life and stable oscillation that the V.S.W.R. (voltage standingwave ratio) shall be kept as low as possible even when the smallest load is applied. When a magnetron is operated with the V.S.W.R. beyond the maximum ratings, it will appear unusual phenomena like high antenna or anode temperature, antenna spark, moding or runaway and may cause the tube to damage. 5.Recommended waveguide design Recommended structure of launcher To prevent microwave leakage from launcher, we recommend to design launcher as shown below. Unit : mm φ30 Note φ33 Note : Flatness of embossed edge should be kept. Also electrical contact should be kept as low as possible. 5/14/99 ...
Need help?
Do you have a question about the Magnetron Head MH3000S-211CV and is the answer not in the manual?
Questions and answers