Advertisement
Enclosure Replacement Kit 289680, 289681
E
G
Disassembly
1. Unplug electrical cord and Relieve Pressure (see
page 1 or Operation manual 312001).
2. Remove 4 side shroud screws (E) (T-20 Torx).
3. Remove 4 front cover screws (B) (T-30 Torx).
4. X7 and LTS 17 Only: Remove underside shroud
screw (D).
5. Remove right shroud (G).
6. Remove left shroud (K).
7. Remove ON/OFF (L) switch from left shroud (K).
All written and visual data contained in this document reflects the latest product information available at the time of publication.
2
N
D
Graco reserves the right to make changes at any time without notice.
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440-1441
www.graco.com
ti10231a
Assembly
1. Install ON/OFF switch (L) into left shroud (K).
2. Install power cord (N) into recess on left shroud (K).
3. Reassemble both shrouds (G and K).
4. Install 4 side shroud screws (E) (T-20 Torx). Torque
to 20 to 25 in-lb (2.3 to 2.8 N•m).
5. Install 4 front cover screws (B) (T-30 Torx). Torque to
26 to 32 in-lb (2.9 to 3.6 N•m).
6. X7 and LTS 17 Only: Install underside shroud
mounting screw (D). Torque to 25 to 35 in-lb (2.8 to
3.9 N•m).
03/2008
B
L
K
312930A
Advertisement
