Advertisement
4.4 Installation Procedure
Unpacking。
1.1 Take out aluminium foil tube;
1.2 Take out side panel package
1.3 Take out rangehood。
Fixate screw 。
2.1 Draw a horizontal line
730-780 mm above the
benchtop, then draw a
centerline from the benchtop,
so it intersects the horizontal
line (see figure 4.1).
Align the bottom edge of the mounting
plate with the horizontal line; then align
the triangular point with the centerline
of the stove. Should keep the mounting
bracket still at all time. If using
expansion anchors, mark those
2 holes on the wall. If using a wall
mounting bracket, then mark
the 3 drilling holes on the wall
(see figure 4.2).
38
Stove centerline
Figure 4.1 PRH900/PRH900A(with rear glass)/PHR900/
PHR910A (with rear glass) drilling diagram
Figure 4.2 PRH900/PRH900A(with rear glass)/PHR900/
PHR910A (with rear glass) drilling diagram
Horizontal line
Holes for expansion anchor
Holes for wall
mounting brackets
Mounting plste
Advertisement
