Advertisement
special instructions
reSetting the budS
Delete the bluetooth name which you got
connected before from your phone.
Touch the left and right earphones for 5
6
times respectively. You will see red and
blue light flash for 2 seconds at the same
time. The earphones will turn on. At the
meantime, the earphones are waiting for
pairing. Within 10 minutes, it will finish
connecting and the earphones will flash
blue light.
To avoid damaging your UNIQ Buds Pro, do not disassemble or tamper
with them. And do not insert any material into them.
Special caSeS
Apple iPhones and some Android phones
support volume control, but for some
Android phones, you can only adjust the
volume of the earphone.
When you adjust the volume
of the earphones, you are also adjusting
the volume of your phone.
Do not touch the touch area while holding
the earphones.
precuationS
Try to listen at low volume. Listening at high
volume for an extedn period may result in
permanent damage to your hearing.
Keep your earphones and accessories out of
reach of children. Children should use the
earphones under the supervision of adult.
Use and store the buds between -15 and
+50 degrees celius. Don't charge where
temperature is below 0 degree C.
Do not expose the earphone to water, moist,
dust and long periods of direct sun light.
IMPORTANT!
Advertisement
