Advertisement
How to install your Flush Pull
We recommend fitting is carried out by a suitably qualified tradesman and ensuring the product is
Flush Pull - x1
Snap off screws - x2
-
Appropriate safety equipment i.e. safety glasses
-
Spirit level
-
Drill
-
Screwdriver
-
Tape measure
-
Pencil
0121 359 2111 | armacmartin.co.uk | sales@armacmartin.co.uk
suitable for your application.
Contents
Tools Required
Advertisement
Table of Contents
Summary of Contents for ARMAC MARTIN Flush Pull
- Page 1 How to install your Flush Pull We recommend fitting is carried out by a suitably qualified tradesman and ensuring the product is suitable for your application. Contents Flush Pull - x1 Snap off screws - x2 Tools Required Appropriate safety equipment i.e. safety glasses...
- Page 2 Step One Define Shape Mark out the rear of the pocket, taking care to measure the dimensions of the flush pull against your cabinetry. Use a spirit level to ensure your cutout shape is level. Step Two Drill Holes Router the pocket and drill holes with a 4mm drill to the correct depth.
- Page 3 Step Four Fix Flush Pull Offer up the flush pull and position it in the pocket to the M4 snap off screws and fix the flush pull to the cabinet. Finish Care & Cleaning Thank you for purchasing your Brass Flush Pull from Armac Martin.
Need help?
Do you have a question about the Flush Pull and is the answer not in the manual?
Questions and answers