Beissbarth BD 6 Series Short Operation Manual

en | 1 | BD 6xx | Short Operation Manual Brake Tester BD 6xx
Description of Display
1 Brake force scale in [kN]
2 IR receiver
3 Side slip measuring scale in [mm]
4 Deceleration in %
Driving request
5 Pictogram test devices
6 Brake force difference in %, axle weight,
ovality
7 Pointer brake force left
8 Pointer brake force right
9 Alarm, automatic lamp
10 Rating scale
11 Red: Error
12 Yellow: Warning
13 Green: OK
14 Operating lamp
15 Automatic button
Beissbarth GmbH
Normal Operation
Move vehicle across
test stand
• Front axle
• Rear axle
With weighing system:
Display of axle weight
when sensoring rollers
are pressed down
Start test stand
Single wheel measuring
• Left ON
• Right ON
or or
Axle measuring
• Automatic button
Measuring operation
Switching off criteria
• Slip monitoring
• Sensoring rollers top
• Manual termination
Red lamp flashes during
by
roller resistance
STOP button
measuring
• Brake force after
brake testing longer
than 6 seconds at the
level of the roller
resistance
Ovality measuring
• Brake forces left and
right larger than 500
N
• The last three
measurements are
saved
Saving
• Front axle
• Rear axle
or or
• Parking brake
Repeated display
• Front axle
• Rear axle
• Parking brake
+
or or
Entry of weight
• Overwriting of weight
is possible
• Change also possible
after printout, as long
as no new saving
took place
Input buttons
• Saving buttons for
total weight and axle
weight exist
+
Saving button
total weight
Display of current
weight
• LCD, right pointer
• 1,000 N = 1,000 kg
Saving button axle
weight
or or
Printout via printer
box
Standard printer
• Olivetti DM 109
• Seikosha SP-2400
LCD display
• Print message
• # Nos of printouts
Total deceleration
service brake
+
Total deceleration
parking brake
+
1 691 606 421 | 2010-07-12