LED Vehicle Worklight
Art.no 36-4487
Model SW12005
36-4821
36-4822
Please read the entire instruction manual before using the product and save it for future reference.
We reserve the right for any errors in text or images and any necessary changes made to technical data.
If you have any questions regarding technical problems please contact our customer services.
Product Description
•
Bright yet energy-efficient worklight for tractors, ATVs, etc.
•
Must not be used in traffic (the light must not be illuminated on public highways).
Assembly
The supplied brackets enable the light to be mounted in different ways.
Alt 1. Screw the mounting plates onto the back of
the LED light using the small screws or bolt them onto
the bottom bracket using an M8 bolt.
Connections
Connect the white cable to the positive (+) terminal and the black cable to the negative (-) terminal of the vehicle battery.
Note: Any supplementary electrical installations to vehicles should be protected by installing a suitable fuse as close to
the battery as possible.
Disposal
Follow local ordinances when disposing of this product. If you are unsure how to proceed, contact your local authority.
Specifications
Service life up to 30,000 hours.
Water resistant
Input voltage
12–24 V DC
36-4487: 18 W
Power
36-4821: 15 W
36-4822: 27 W
Size
36-4487: Ø 115 mm (excl. brackets)
36-4821: 110 × 110 mm (excl. brackets)
36-4822: Ø 125 mm (excl. brackets)
GREAT BRITAIN
For consumer contact, please visit www.clasohlson.co.uk
and click on customer service.
SW12210
SW12006
Alt 2. Attach the brackets to the vehicle and then
mount the LED onto the brackets.